Marantz sr5002 only takes input in 1 channel - diyAudio
Go Back   Home > Forums > Amplifiers > Solid State
Home Forums Rules Articles diyAudio Store Gallery Wiki Blogs Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Solid State Talk all about solid state amplification.

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 10th February 2015, 03:21 AM   #1
srinath is offline srinath  United States
diyAudio Member
 
Join Date: Feb 2010
Default Marantz sr5002 only takes input in 1 channel

OK atleast for me, this is a first.
Its got all channels of output. But it only has 1 working input channel. Only the white RCA is working, the red RCA isn't taking input in tape or CD or anything.

Almost like I should go looking for a missing jumper - except, its not got any. It has 5.1 preouts and 5.1 in's. But not pre out main in jumpers.

Anyone had somehting like this happen ?

Thanks.
Srinath.
  Reply With Quote
Old 13th February 2015, 04:15 PM   #2
diyAudio Member
 
east electronics's Avatar
 
Join Date: Jan 2006
Location: Athens GREECE
Try to see what happens if source direct is pressed ...As a function source direct will bypass all tone control circuits sending the signal directly to the amplifiers .

If this works means that the digital board of your amp is toasted and either to expensive to fix or impossible to get .

Amp might be usable for many years to come in source direct mode
__________________
SERVICE ΕΝΙΣΧΥΤΩΝ ΚΑΙ ΙΑΠΩΝΙΚΩΝ ΜΗΧΑΝΗΜΑΤΩΝ ΗΧΟΥ www.eastelectronics.gr
  Reply With Quote
Old 13th February 2015, 05:50 PM   #3
srinath is offline srinath  United States
diyAudio Member
 
Join Date: Feb 2010
I screwed up in the setup menu.
Its fine now.
Thanks.
Srinath.
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Single-cycle symmetric (N - P - N channel + P - N - P channel) repeater plated input FEDOSOFF Solid State 54 16th June 2016 10:58 PM
Deer Takes Down Hunter billjames The Lounge 91 1st December 2011 03:18 PM
Another G Chang takes its first steps Justin Wake Full Range 8 22nd July 2008 03:46 AM
marantz hum on one channel ian21 Solid State 0 14th June 2008 11:54 AM
I hope nobody takes this the wrong way... ptwining Class D 100 26th January 2008 06:11 AM


New To Site? Need Help?

All times are GMT. The time now is 01:33 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.
Copyright 1999-2016 diyAudio

Content Relevant URLs by vBSEO 3.3.2
Wiki