Well, 2000watts is rather excessive and only in extreme cases do you need this (if it has to be louder, higher efficiency speakers would be a better way to go). But 200+ is alot more reasonable.
There are numerous designs around in that wattage range, just search around a bit on the net. If it's your first time it'd probably be easier to run two smaller powered amps in bridge mode, instead of one larger amp.
As for price well, it all depends on what quality components you use, it gets really expensive when you use "audiophile" grade components, tantalum resistors, polystyrene caps, but can be very reasonable if you use high quality "normal" parts...
There are numerous designs around in that wattage range, just search around a bit on the net. If it's your first time it'd probably be easier to run two smaller powered amps in bridge mode, instead of one larger amp.
As for price well, it all depends on what quality components you use, it gets really expensive when you use "audiophile" grade components, tantalum resistors, polystyrene caps, but can be very reasonable if you use high quality "normal" parts...
Try This Link for your general audio interests:
http://sound.westhost.com/index.html
If you want to build something really good try this:
http://www.passlabs.com/
http://sound.westhost.com/index.html
If you want to build something really good try this:
http://www.passlabs.com/
Check out www.sealelectronics.com or call Randy Slone he is a very good guy to ask about you're Amp question or read his books search it at amazon.com
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.