diyAudio (
-   Solid State (
-   -   Leach amp w/o feedback (

Musher 3rd March 2002 12:41 AM

Leach amp w/o feedback
Would there be any idea in using Leach amp without feedack? I know it'd increase THD, but to counter that I could match all stages. I think some version was quoted as having 1% THD at 50W without feedback. And if that's lower with less power, I might as well give it a try.

-Kimmo Sundqvist

ppl 5th March 2002 10:43 AM

How would you then define the Closed Loop Gain? would you also Reduce the Amps Origenal Openloop gain? I have used a Multiloop Feedback on the Leach Amp by applying a resistor from each side of the Voltage gains second stage to the Inverting input. Also the output stage is feed back to thie inverting input. The Open loop vs closed loop gain of the amp can now be easly controled. Other methods of reducing the Openloop gain include larger Emmiter resistors on eather the First Diff Amp or the Second Gain stage. Exparamentation in encouraged like i have also operated the output stage only Outside the Feedback Loop with the Feedback still taken from the Voltage gain stages as in the multiloop method. Anyway yave fun with this because you can the Possibilities are endless.

All times are GMT. The time now is 01:59 PM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 18.75%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio