You don't need a gerber viewer,you need the Sprint LayoutThanks Smart, do you perhaps have the older version without the 1000uf caps.
Thimios, sorry, sitting with a new laptop without Gerber viewer. !
Hi:
Some people have very strong opinions about only certain MOSFET's sounding OK in audio, not liking MOSFETS with less-desirable channel geometry, etc.
Anyone know what problems the less-desirable MOSFET types cause?
I'm also intrigued to read about the quasi topology producing more even harmonics (even if should be obvious, I never got the thought, so thanks for pointing that out).
My interest is more toward musical instrument amplification leaning toward to clean side, but not like I would want listening to records.
I have a lot of odd orphan MOSFET's and heatsinks and have been looking at power followers and other simple amps.
Thanks
Murray
Some people have very strong opinions about only certain MOSFET's sounding OK in audio, not liking MOSFETS with less-desirable channel geometry, etc.
Anyone know what problems the less-desirable MOSFET types cause?
I'm also intrigued to read about the quasi topology producing more even harmonics (even if should be obvious, I never got the thought, so thanks for pointing that out).
My interest is more toward musical instrument amplification leaning toward to clean side, but not like I would want listening to records.
I have a lot of odd orphan MOSFET's and heatsinks and have been looking at power followers and other simple amps.
Thanks
Murray
Sorry guy's, the pdf's I need is for this PCB.
Simply cut and add spade connectors.
Last edited:
Sorry guy's, the pdf's I need is for this PCB.
Searching, I think the original it's found on post #1587.
Thiago published Gerbers and Lay6 on others messages around.
Rgds.
Attachments
Last edited:
Thiago,please post this as pdf when you have the time.I've applied some image transformations in order to try to help you.
Please check - and adjust - dimensions and any need of inverting the picture.
Regards,
Max.
Attachments
Last edited:
Thiago,please post this as pdf when you have the time.
Maybe this one can help in the meantime.
Attachments
Oh many many thanks Thiago!Your wish is an order.
Thank you!
This is a perfect size format for a compact case like this. It lets me have the entire middle for a toroidal trafo as there are no PSU boards to take up room on main base plate.
HIFI audio amp Aluminum case 2412C Full Aluminum Amplifier case /Mini AMP Case/ Preamp Box/ PSU Enclosure 240*120*271mm-in Amplifier from Consumer Electronics on Aliexpress.com | Alibaba Group
This is a perfect size format for a compact case like this. It lets me have the entire middle for a toroidal trafo as there are no PSU boards to take up room on main base plate.
HIFI audio amp Aluminum case 2412C Full Aluminum Amplifier case /Mini AMP Case/ Preamp Box/ PSU Enclosure 240*120*271mm-in Amplifier from Consumer Electronics on Aliexpress.com | Alibaba Group
Last edited:
- Home
- Amplifiers
- Solid State
- Very simple quasi complimentary MOSFET amplifier