Here I was thinking that I was the only one here with a fetish for cap orientation 😀
not only, I want all my resistors with the tolerance band pointing the same direction, this for not other reason that aesthetics
Actually, I always put my electros in the same polarity too, BUT, it's not needed, it's OCD stuff I enjoy and don't expect others to enjoy it........
Hugh
Hugh
At start up i hear nothing.Thimios,
How bad is the start up whistle and thump?
Hugh
No thump,no hiss,nothing!
Recieved Prasies boards from Bangla H but one minor thing the mounting holes for the output fets are way to big(my bad) please use 3mm holes there
What is the latest updated BOM and schematic?
What is the latest updated BOM and schematic?
Last edited:
Gerbers for V4.2 as per post#590 as requested by some members.
reg
prasi
Sprintlayout file?
Sprintlayout file?
Hi meanman,
I have eagle files, is ok with you? BTW, how did the holes become bigger? I think I had kept 3.5-4mm, but use of washer will make the load distributed and will not cause PCB crack due to stress. i will try and import in sprint and upload here later today.
reg
prasi
Last edited:
eagle 7.2.
Have that one too but would be happy with Sprintlayout file because i'm still learning Eagle
Have that one too but would be happy with Sprintlayout file because i'm still learning Eagle
Here you go.. Sprint file as imported from gerbers for reference and checking. I will always feel confidence with original gerbers. Also latest scheme same as # 590 is attached. also the parts list
Attachments
Last edited:
I like to start gathering all the parts so I need the latest schematic and partlist
Hi Meanman,
Are you planning to organize a GB ? If so, which PCB will it be, Prasi or Thiago ?
I honestly prefer the one from Thiago simply because of the added rectifier diodes and filtering cap, it makes the design easier to implement.
Keep us posted,
Eric
I prefer prasi his design but what do you think guys?
Thiago his second design is okay too but I would make the pcb a bit longer for the use of an alu. L bracket or do you mean the first design?
For the second design I would like the FetZilla style
Thiago his second design is okay too but I would make the pcb a bit longer for the use of an alu. L bracket or do you mean the first design?
For the second design I would like the FetZilla style
Last edited:
For me it doesn't matter but the question is which one?
Or prasi his design?
Or prasi his design?
Attachments
Last edited:
- Home
- Amplifiers
- Solid State
- Very simple quasi complimentary MOSFET amplifier