Go Back   Home > Forums > Amplifiers > Solid State

Solid State Talk all about solid state amplification.

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 31st January 2014, 03:38 PM   #1
diyAudio Member
 
Join Date: Jan 2014
Default pioneer sa 1010 burning resistor

Hi
All new to this. Trying to repair my Pioneer Sa1010 but after changing many caps and transistors still burns R11 10 ohm resistor. When checking the power supply circuit board there was a much larger resistor which a repair shop had put in.Whilst checking other things I replaced it with the correct one as the schematic. Have attatched circuit diagram and any help would be much appreciated.
Attached Images
File Type: jpg sa 1010.jpg (365.7 KB, 87 views)
  Reply With Quote
Old 31st January 2014, 05:17 PM   #2
llwhtt is offline llwhtt  United States
diyAudio Member
 
Join Date: Jun 2008
If R11 is burning that means too much current through it, problem is where ever pin 14 connects to.

Craig
  Reply With Quote
Old 31st January 2014, 06:17 PM   #3
diyAudio Member
 
zeonrider's Avatar
 
Join Date: Mar 2004
Location: Belgrade RS
Something behind the 56V pin 14 draws too much current. Maybe it's a short circuit.
  Reply With Quote
Old 31st January 2014, 06:49 PM   #4
diyAudio Member
 
Join Date: Jan 2014
Thanks for the replies. 14 leads to the power amp assembly. Have attatched diagram for that. Will have to look further.
Attached Images
File Type: jpg power amp assembly.jpg (303.2 KB, 69 views)
  Reply With Quote
Old 31st January 2014, 06:58 PM   #5
diyAudio Member
 
Join Date: Jan 2014
Sorry it leads to number 4
  Reply With Quote
Old 31st January 2014, 07:34 PM   #6
diyAudio Member
 
Nico Ras's Avatar
 
Join Date: Nov 2005
Location: East Coast of South Africa
Do you measure the voltages as indicated on the schematic. They are there for a reason. If they are correct undo the 56V and place a current meter in between, then work out the wattage needed for the 10 ohm.
__________________
Kindest regards
Nico
  Reply With Quote
Old 3rd February 2014, 04:03 PM   #7
diyAudio Member
 
Join Date: Jan 2014
Have found shorted transistor Q10. fingers crossed when replaced. With power amp boards disconnected votage at 14 was 56v.
  Reply With Quote
Old 4th February 2014, 12:16 PM   #8
diyAudio Member
 
Nico Ras's Avatar
 
Join Date: Nov 2005
Location: East Coast of South Africa
Well done Ken
__________________
Kindest regards
Nico
  Reply With Quote
Old 5th February 2014, 12:29 PM   #9
diyAudio Member
 
east electronics's Avatar
 
Join Date: Jan 2006
Location: Athens GREECE
Good to see you Nico How are you doing !!!

Kind regards
Sakis
__________________
SERVICE ΕΝΙΣΧΥΤΩΝ ΚΑΙ ΙΑΠΩΝΙΚΩΝ ΜΗΧΑΝΗΜΑΤΩΝ ΗΧΟΥ www.eastelectronics.gr
  Reply With Quote
Old 6th February 2014, 06:59 PM   #10
diyAudio Member
 
Nico Ras's Avatar
 
Join Date: Nov 2005
Location: East Coast of South Africa
Hi Sakis, I have been lurking in the dark lately, I am well thank you.

Ken if anybody can help you, then Sakis is your man!
__________________
Kindest regards
Nico
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
musical fidelity P140 burning resistor cookachoo Solid State 0 3rd January 2013 11:34 AM
Amplifier burning resistor. argonrepublic Solid State 33 18th October 2011 09:48 AM
HELP! B+ voltage problem/burning power resistor chalieroundeye Tubes / Valves 1 6th September 2005 03:36 AM
Resistor keeps burning in my Marantz 1060! Giaime Solid State 136 19th April 2005 01:59 PM
Former audio snob humbled; Pioneer SX-1010 question Jim B Solid State 4 16th January 2005 06:09 PM


New To Site? Need Help?

All times are GMT. The time now is 04:44 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2