diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Solid State (http://www.diyaudio.com/forums/solid-state/)
-   -   Dx Juan layouts ideas PCB (http://www.diyaudio.com/forums/solid-state/245084-dx-juan-layouts-ideas-pcb.html)

vargasmongo3435 31st October 2013 01:34 PM

Dx Juan layouts ideas PCB
 
8 Attachment(s)
Well actually this is for reference only maybe good or bad ideas that I have been done for the pass 2 years, I'm not an expert but I still learning here are example of some layouts I've been making for a long time the last one I did is Dx Super A and I'm happy with the results, a few days ago some one told me that this is not about brands or make small or too neat or aligned is about create a functional layout that is mechanically correct example I've been reading the thread of "Honey Badger" and mister OS he knows what he was doing there is a lot of planning concerning avoid oscillations, parasite capacitance, the correct traces thickness there is more to it but let's leaved simple, so it opens my eye that is not about size, neat or

"fancy macros"

is about a correct well planed design that can perform with no layout problems.

I did learn electronic in the US Army but was not about designing stuff was more about repairing stuff in the field my MOS was 94F "Special Electronics Device Repair" so nothing about designing stuff only repairs, is "go or no go"

any way I will leave this images so you guys can see some good some wrongly made,but this my help others to understand that is not an easy task it needs planning and cost budged and all that good stuff.

Also the only software I use is Sprint Layout 5 and I have been use it for about 2 years, I know they are more better software that have more options
but for audio amplifier PCB designs is fine for me I have plans to buy the new version 6 but I'm afraid that files from 5 will not work with the older version let see what might happen :D, ok so I will share macros designs simple stuff I will arrange them in categories resistors, heat sinks, diodes, transistors, others,.

Maybe I will make simple tutorials about making new macros and some other information.



I will leave the images here maybe this will give you ideas sometimes we have the knowledge to create something and we do not have the puzzle resolve. ok guy have a wonderful Halloween have fun but do not eat too many candies jejejeje :Pumpkin: have fun :D

Regards
Juan

farjon 31st October 2013 02:24 PM

Hi, Juan.

Files from 5 will work on 6. On saving, you will be asked if want conversion to new format (.lay6).

Files from 6 will not work on 5.

Rgds.

vargasmongo3435 31st October 2013 02:53 PM

man that is really sad oh well I guess I have to save all my files to the new 6 software .lay6 is time to upgrade, thanks for the info :)

Regards
Juan

wiljj78 31st October 2013 03:48 PM

Nice nice nice....

vargasmongo3435 31st October 2013 04:29 PM

hey buddy good to see you here you are welcome to post ideas too every one can participate :)

Regards
Juan

Krisfr 31st October 2013 04:43 PM

Where is the schematic for the 5 pair layout with plus and minus 90 volts?

You work is phenomenal, very good.

Thanks

vargasmongo3435 31st October 2013 05:01 PM

Quote:

Originally Posted by Krisfr (Post 3686659)
Where is the schematic for the 5 pair layout with plus and minus 90 volts?

You work is phenomenal, very good.

Thanks


Oh well that is 6 pairs but the schematic belong to Carlos Dx Blame MKIII is not tested or approved by Carlos I posted as example not really a diy project


I was having plans to make it but I still got to check for errors so did you like it wow I thought nobody will like it jejejejeje :D thanks for the comment

Regards
Juan

wiljj78 31st October 2013 05:15 PM

Quote:

Originally Posted by vargasmongo3435 (Post 3686645)
hey buddy good to see you here you are welcome to post ideas too every one can participate :)

Regards
Juan

Many thanks bro....I hope many diyers will share some advance design layout techniques too...

Krisfr 31st October 2013 05:19 PM

I hope you do the tutorial on YouTube...

wiljj78 31st October 2013 05:24 PM

Agree... I hope Master Juan will show us some video tutorial....;) I knew he can do it easily..


All times are GMT. The time now is 11:12 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2