|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Solid State Talk all about solid state amplification. |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
10th May 2013, 03:27 PM
|
#1 |
|
diyAudio Member
Join Date: May 2013
|
Vintage Yamaha Pro amps - Cascoded sections
Hi Everyone,
I've been doing some research before assaulting the pair of Yamaha P2100s I own, and perhaps creating new differential input stage as well as making room for better AC coupling than original. I just spent $150 on balanced input cables and I intend to use them!  I'm curious as to whether anyone has done an in -depth analysis of the input stages. There are a pair of cascoded amplifier stages, which then connect to the drivers in a single ended fashion. Further, to do this Yamaha added 2 new secondary windings to provide an extra (-) rail. This idea seems to have been taken forward to the P2200, some home amps as well. Closest things I could find are mentions by Nelson Pass and a very interesting set of analysis done regarding "circuit memory" and amplifier linearity. Thanks! Erik |
|
|
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| JA3103 Yamaha vintage driver | klampykixx | The Lounge | 0 | 18th December 2012 09:07 AM |
| yamaha B4 B5 amplifer Vintage | muddasirwaheedmalik | Solid State | 9 | 11th January 2012 12:27 PM |
| Using cascoded JFETS to bias op-amps into class A | Dr.H | Chip Amps | 3 | 25th February 2004 05:54 AM |
| Help with Yamaha Pro-Amp | Netlist | Solid State | 3 | 11th April 2003 08:30 AM |
| New To Site? | Need Help? |
