diyAudio (
-   Solid State (
-   -   Leach LMF-1 dead channel (

kennethrl 30th April 2013 06:47 PM

Leach LMF-1 dead channel
One channel is distorting on my Leach LNF-1 amp. I took it apart and found one electrolytic capacitor was discolored. I replace the cap with the another electrolytic that was in series with the problem cap. This did not fix the problem my question is :
1. Is there anyone out there that has experience with this circuit and any suggestions where to look next?
2. Do you know anyone that repairs this amp? I tried to contact some repair shops in the Boston area with no luck.

Just for reference the C9 150uf and C7 35uf was replaced as per Electronic One Inc drawing.

All times are GMT. The time now is 03:38 PM.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright 1999-2017 diyAudio

Content Relevant URLs by vBSEO 3.3.2