need help repairing ppi 4400m - diyAudio
Go Back   Home > Forums > Amplifiers > Solid State

Solid State Talk all about solid state amplification.

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 1st April 2013, 03:23 PM   #1
diyAudio Member
 
Join Date: May 2011
Unhappy need help repairing ppi 4400m

let me just tell you happened to my amp i bought it used and had it while doin nothing so 1 of my friend came and asked for it borrow so i lent him an helped with the installation and it worked good but he went on his own an tried to rewire it an he did something to it not sure just was not powering up so i carried it by a guy to get it repaired after sum time about two weeks i went to collect my amp but he told me that had didn't get time to fix it this went on for about 7 months so i got vex an asked him for came home and saw the amp was striped of all transistors and a few resistors and the ic that was near the 2 big 1000uf capacitors i wanted to dump this but changed my mind i know all of the original transistors but being that all were out already and i can't get the oringinal part what can i use
if i can use a transistor that can even give me 1watt more power i will buy an use that instead also i only plan to run this amp bridged to play two 4ohm speaker
  Reply With Quote
Old 1st April 2013, 03:50 PM   #2
diyAudio Member
 
Join Date: May 2011
when i replace the parts there is a good chance it might not power up still so any ideas what might have been the cause
i suspect he might have crossed sum wires
all the aother componets within the amp has no visual defects so i guess it could have been his fault of crossing wires
AmpGuts.com

AmpGuts.com

AmpGuts.com

from those pictures i can tell you what and where it is missin
again all transistors
resistors r17 r19 r21 r39 r41 r43
all of them are on the output side of the amp
the colour code are red red silver gold
r136 is next to where big ic was and next to the 1000uf 50v cap

r130 its behind the small switch next
r124
r100
r110
r118
  Reply With Quote
Old 1st April 2013, 03:59 PM   #3
diyAudio Member
 
Join Date: May 2011
the rest of the resistors are on the power up side of the board
If i can use a transistor that can give me 1w more power or more i will so if you can tell me what transistor will do that i will be grateful
  Reply With Quote
Old 1st April 2013, 06:10 PM   #4
diyAudio Member
 
Join Date: May 2011
The transistors it had was 2n6487 2n6490 what would be a proper up grade with more output
i know adding bigger transistors might make more heat
i have enough fan to cool a whole car lol
  Reply With Quote
Old 1st April 2013, 10:11 PM   #5
diyAudio Member
 
Join Date: Apr 2010
Location: Coffs Harbour
Hi
The links you posted above are to another forum that requires paying a fee to access your information. Whatever the dollars involved, that's not going to happen. The PPI 4400 is also a piece of car audio gear which you'll find already discussed in the Car Audio Forum.
Try posting there or ask moderators to shift your posts by reporting your own post, if necessary.
__________________
Ian
  Reply With Quote
Old 1st April 2013, 10:20 PM   #6
diyAudio Member
 
Join Date: Dec 2012
Location: The Jurassic Coast, England. GB
Send a message via Skype™ to JonSnell Electronic
Include a full schematic and we will be able to help.
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
repairing PPI PCX-2200 redblaze Car Audio 20 26th December 2013 11:19 PM
repairing PPI 356CS component mr5parkle Car Audio 0 27th September 2011 07:48 PM
Repairing A PPI PC450 elvi Car Audio 12 26th February 2010 03:17 AM
Repairing a PPI PC6600.2 kcdonahue Car Audio 5 9th December 2008 11:28 PM
Repairing PPI 2050AM bruneti Car Audio 2 2nd September 2006 09:59 PM


New To Site? Need Help?

All times are GMT. The time now is 02:00 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright ©1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2