Crimson Elektrik PCB's

[BigBrian]

Hi Masood
Pictures of the PCB are posted in earlier messages.

 

[masood]

dear sir,
i searched but there is no pcb.plz help me

 

[AndrewT]

Posts 7, 8 & 10 show the PCB/s.
If you want to copy the IP belonging to Crimson, then ask Brain Powell for permission.

 

[bepowell]

The CE3004 schematic is at:-
http://homepage.ntlworld.com/bepowell/schematics/CE3004.pdf

 

[nigelwatlondon]

Broken Link

Hi Brian,
tried accessing this link
http://homepage.ntlworld.com/bepowel...tics/CPR1b.pdf
to no effect. The thread is a few years old. Have you moved house...
Cheers,
Nigel

 

[AndrewT]

I'll attach some Crimson sch that have been posted previously.

 

[nigelwatlondon]

Thanks Andrew,
Emailed Brian Powell for details of repairs etc. He is alive and well and still doing repairs...
The link was broken apparently because Virgin don't allow free storage.
All the best,
Nigel

 

[Jabiru]

Anybody know how to set the trimpot on CE1708 modules, I’m guessing it’s the standing current in one of the supply lines with or without load ???

 

[EssB]

Anybody know how to set the trimpot on CE1708 modules, I’m guessing it’s the standing current in one of the supply lines with or without load ???

20mA in positive supply line. See 2nd page in this file posted above: http://www.diyaudio.com/forums/attachments/solid-state/595231d1485631575-crimson-elektrik-pcbs-crimsonce1008vii-pdf
Load connected or not shouldn't matter as long as offset is low enough.

 

[Jabiru]

Got it thanks