Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Solid State Talk all about solid state amplification.

What to connect to earth ground?
What to connect to earth ground?
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 17th March 2013, 12:05 AM   #1
Fusion916 is offline Fusion916  United States
diyAudio Member
 
Join Date: Feb 2012
Default What to connect to earth ground?

If you have 3 pcbs in a single chassis, two amps and a power supply, do you need to connect all grounds to the earthed point in the chassis? Or can you only connect the power supply's ground to chassis?
  Reply With Quote
Old 17th March 2013, 12:23 AM   #2
Andrew Eckhardt is offline Andrew Eckhardt  United States
diyAudio Member
 
Join Date: Nov 2005
I would make a single signal ground node at the power supply and isolate it from the chassis (except for maybe some fairly high impedance connection for static drain) which should be connected to earth ground. This way the signal source can establish the ground reference for the active circuits with no current loops. Of course this means using the same isolating style connectors for the return side of the outputs as used for the "hot" side.

Last edited by Andrew Eckhardt; 17th March 2013 at 12:30 AM.
  Reply With Quote
Old 17th March 2013, 07:36 AM   #3
djk is offline djk
diyAudio Member
 
djk's Avatar
 
Join Date: Feb 2001
Location: USA
I would consider using the bridge-rectifier ground disconnect method used by Bryston (and others). The left-hand bridge is the ground disconnect, the right-hand bridge is the DC blocker for a toroid transformer.

Click the image to open in full size.
__________________
Candidates for the Darwin Award should not read this author.
  Reply With Quote
Old 17th March 2013, 12:08 PM   #4
AndrewT is online now AndrewT  Scotland
diyAudio Member
 
Join Date: Jul 2004
Location: Scottish Borders
One connection from Chassis to Main Audio Ground. ONLY ONE.
__________________
regards Andrew T.
  Reply With Quote
Old 17th March 2013, 12:33 PM   #5
Pano is offline Pano  United States
diyAudio Moderator
 
Pano's Avatar
 
Join Date: Oct 2004
Location: SW Florida
What to connect to earth ground?
Please see this excellent article by Dave Davenport in the diyAudio articles section:
Audio Component Grounding and Interconnection
  Reply With Quote

Reply


What to connect to earth ground?Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Should I directly connect my signal ground to chassis ground? Bricolo Solid State 4 18th March 2014 09:42 PM
Voltage between chassis ground and earth ground haselphlunk Instruments and Amps 17 19th November 2012 04:21 AM
Chassis, ground, earth: connect? starbase218 Solid State 3 14th November 2007 08:56 AM
chassis ground vs. earth ground avid Chip Amps 4 10th November 2006 12:56 PM
signal ground and earth ground ttray321 Tubes / Valves 9 3rd May 2005 03:14 AM


New To Site? Need Help?

All times are GMT. The time now is 12:32 PM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.79%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio
Wiki