tash ma hall amp

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
this project is characterized by a high circulating current
especially in the differential input stage

in fact is a current mirror CFP

the next stage is characterized by a bootstrap titpico schema Jeff Rowland

Then the typical triplet EF emitter follower

if you like to use the simulator calculates the optimized values ​​of 35V dual

Thanks:D
 

Attachments

  • Tash Ma Hall Amp.PNG
    Tash Ma Hall Amp.PNG
    81.8 KB · Views: 313
Crossover

I would like to do the speakers for amplifier 60W RMS / 8 ohm. I watched the speakers Woofer Beyma 8BR40/N - 50W RMS, 35 - 6000 Hz, 90 dB, 8 ohm and Tweeter Beyma T2030 - 15W RMS, 1,5 - 20KHz, 95 dB, 8 ohm with crossover Beyma V2 hifi, 300 W, freq 3 KHz, 8ohm.

I turn to you, because I'm not so sure that this is a good relationship and frequency of cutting 3 KHz correct

Would it be better if I would use stronger tweeter and would cut the freq to 4 or 5 KHz
.
Does anybody can help me with advice and calculation for crossover

Best regards
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.