Three Transistor push-pull amp
I found this website and it sounded interesting, so I upload the link:
It has several issues but I want to try here is: pull amplifier push-pull three transistors.
a video of the web page:
Niep 002 - YouTube
link the web site:
I upload a picture to be more didactic.
upload in pdf::):):):):):):):):):)
I'm afraid you will get high distortion.
But the circuit will work.
Big problem can be when using 8 Ohm loudspeaker. Circuit shows 25 Ohm.
If you use 32 Ohm, or more, headphones it might work okay.
But you can count on rather high distortion anyway.
There are a few little changes you could make that would greatly improve the performance. Add Bootstrap Cap C9, and take the feedback from the output, rather than from the driver. See the enclosed schematic. Otherwise, I tried to leave it much as it was...
|All times are GMT. The time now is 08:29 AM.|
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2015 DragonByte Technologies Ltd.
Copyright ©1999-2015 diyAudio