Too danger if run this circuit with 2SC5200/2SA1943 at max rail (95V).
Datasheet 2SC5200/2SA1943 show they're have 0.45A@100V@DC. +/-95 will get about 800 ~ 900W@4R, equal 15A current load. This impossible with 8 pairs power output transistors.
More than 15 pairs will to do it.
Datasheet 2SC5200/2SA1943 show they're have 0.45A@100V@DC. +/-95 will get about 800 ~ 900W@4R, equal 15A current load. This impossible with 8 pairs power output transistors.
More than 15 pairs will to do it.
BRIDGED AMP SCHEMATIC
warm regards
andrew lebon
Diagramas amplificadores - Página 165
TR-3500 yirochi = TR-7007
Last edited:
YIROSHI
you mean this contribution:
Amplificador Yiroshi TR3500 Con Super Driver 1500W
Also can be found on FOROSDEELECTRONICA, but closed the topic:
Diagramas amplificadores - Página 165
TR-3500 yirochi = TR-7007
you mean this contribution:
Amplificador Yiroshi TR3500 Con Super Driver 1500W
Also can be found on FOROSDEELECTRONICA, but closed the topic:
AMPLIFIERS
hello vargasmongo3435.
have much reason.
I bring in foroselectronica YIROSHI excellent amplifiers.
Too bad he was expelled, but just the few amplifiers that provide very good achievement.
I must say that many are not but if your designs are good Redesigns worth admiring.
Looks really interesting this amplifier Yiroshi I like the component alignments, really nice indeed.
Regards
vargasmongo3435
hello vargasmongo3435.
have much reason.
I bring in foroselectronica YIROSHI excellent amplifiers.
Too bad he was expelled, but just the few amplifiers that provide very good achievement.
I must say that many are not but if your designs are good Redesigns worth admiring.
Last edited:
preamp
hello how are you, I was watching the photo of this preamp and I'm interested much I would like to know if it is possible to obtain the respective pcb and assembly of this design, I hope early reply thanks
if anybody need this hifi preamp ,sub i will share.
hello how are you, I was watching the photo of this preamp and I'm interested much I would like to know if it is possible to obtain the respective pcb and assembly of this design, I hope early reply thanks
Hi forum friends, I have the layout of the amplifier jbl Megatech Urei 6290, but only I have the layout, one of you will have more information on this amp, or someone can tell me if this driver works well, I Realize the simulation of the same from layout, in multisim 12 and apparently works fine, but I would like to get the schematic of it.
thanks for your comments.
Regards.
thanks for your comments.
Regards.
Attachments
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Amplifiers
- Solid State
- 100w to 1000w class ab