help needed!! marantz 2270 and 2330b

mohawkpride · 27th December 2012, 09:21 PM

i am looking to rebuild these 2 fine pieces of junk! i got them from my old tech who is retired now.. i bought them as projects some time ago. the 2330b needs hard to find parts like face plate,covers,and knobs, the left side output is burnt out i needs to sourse some of these parts.. any help would be great.

now the 2770 needs top bottom cover all knobs and i would like to restore both side of the output not sure where to sourse out parts here in ontario canada i would prefer some place close by to get parts and any information on what i should replace on either reciever would be great. please i need the help i cannot wait to start using these vintage marantz pieces. thank-you

RS232 · 30th December 2012, 06:01 PM

I just did a Sansui 5050 and it was not an easy task even with the service manual.
I just want to wish you good luck with your project.
The electronics can be fix (get the service manuals ) but the front panel and knobs are close to impossible to get.
The one thing you can do is to look on ebay for faulty ones that are complete and go from there.
Another thing is this way you get the unobtanium power transistors that with luck will make you fix one of them.
Good luck

Ric

downhiller2010 · 30th December 2012, 08:48 PM

Check out the marantz forum on audiokarma. There are some real knowledgable guys over there that have walked me through all of the rebuilds of my marantz units.

27th December 2012, 09:21 PM	#1
mohawkpride diyAudio Member Join Date: Dec 2012	help needed!! marantz 2270 and 2330b i am looking to rebuild these 2 fine pieces of junk! i got them from my old tech who is retired now.. i bought them as projects some time ago. the 2330b needs hard to find parts like face plate,covers,and knobs, the left side output is burnt out i needs to sourse some of these parts.. any help would be great. now the 2770 needs top bottom cover all knobs and i would like to restore both side of the output not sure where to sourse out parts here in ontario canada i would prefer some place close by to get parts and any information on what i should replace on either reciever would be great. please i need the help i cannot wait to start using these vintage marantz pieces. thank-you

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
marantz cd6002, help needed	elet	Digital Source	3	25th September 2012 04:17 PM
STA-2270 realistic amp	jazzlap	Chip Amps	0	22nd January 2012 02:10 AM
Marantz 2330b report	squarehdca	Solid State	0	4th February 2009 01:05 AM
Marantz CD6000 - a little help needed	Baka	Digital Source	0	3rd May 2006 08:07 AM
Marantz 2270 Dial cord gauge	naimgame	Solid State	2	28th May 2004 04:13 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

30th December 2012, 06:01 PM	#2
RS232 diyAudio Member Join Date: Jan 2006 Location: Swindon	I just did a Sansui 5050 and it was not an easy task even with the service manual. I just want to wish you good luck with your project. The electronics can be fix (get the service manuals ) but the front panel and knobs are close to impossible to get. The one thing you can do is to look on ebay for faulty ones that are complete and go from there. Another thing is this way you get the unobtanium power transistors that with luck will make you fix one of them. Good luck Ric

30th December 2012, 08:48 PM	#3
downhiller2010 diyAudio Member Join Date: Feb 2012	Check out the marantz forum on audiokarma. There are some real knowledgable guys over there that have walked me through all of the rebuilds of my marantz units.