help to select and correct 400w TDA2030A OR 200WTDA2030 - diyAudio
Go Back   Home > Forums > Amplifiers > Solid State

Solid State Talk all about solid state amplification.

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 17th November 2012, 10:20 PM   #1
diyAudio Member
 
Join Date: Oct 2012
Location: Flower City
Cool help to select and correct 400w TDA2030A OR 200WTDA2030

please see below site project and help me to select best schmatic in this two
project??

regards


400w TDA2030A (2*200w)
TDA2030 köprü paralel ba?lant? 200watt anfi devresi | Elektronik Devreler Projeler 320 Volt

or


200w tda2030
TDA2030 200W Anfi Yeni Bask? Devre | Elektronik Devreler Projeler 320 Volt

Why difference in two circuit (mistake )
what is youre vote about old schematic ?

I OWN 2 TDA2030A NOW....
Attached Images
File Type: gif 400w TDA2030A.GIF (70.8 KB, 379 views)
File Type: gif 200W TDA2030.GIF (167.2 KB, 376 views)
File Type: gif power 200watts-amplifier 550x382.gif (122.9 KB, 367 views)
  Reply With Quote
Old 19th November 2012, 02:27 PM   #2
diyAudio Member
 
Join Date: Jan 2011
Location: Fosser, Aurskog-Holand, Akershus, Norway.
400W? 200W?

Sorry, no way.

If You are looking for an amp with such wattage, there is no possibility at all getting it out of theese ICs.
Never ever think of Watt when PMPO is one of the terms involved, wich is in this case.

Look around in here and You will find much better alternatives.
__________________
Sooner or later you end up with TANDBERG
  Reply With Quote
Old 19th November 2012, 08:41 PM   #3
jaycee is offline jaycee  United Kingdom
diyAudio Member
 
Join Date: Apr 2004
Location: Norwich, UK
There are no chip amps that will give you 400W into 4 ohms. For this sort of power level you need to build a discrete amplifier. By the time you have paid for the needed transformer, transistors and heatsinks, you will be able to buy a second hand PA amplifier that will do the job much cheaper.
  Reply With Quote
Old 19th November 2012, 09:55 PM   #4
diyAudio Member
 
Join Date: Oct 2012
Location: Flower City
please see below site project and help me to select best schmatic in this two
  Reply With Quote
Old 20th November 2012, 03:04 AM   #5
sregor is offline sregor  United States
diyAudio Member
 
Join Date: Jan 2006
Location: massachusetts
Circuit is chip amp with discrete outputs and bridged. Comes pretty close to 200W into 4 ohms. Either side of bridge should put out about 15 rms volts at clipping which gives you 30 rms into bridged load - which is 225 watts IF the supplies hold up and the output transistors can take it. (Big heatsinks, hefty power supply and rugged output devicess) .

FWIW both circuits look about the same. What differences are you seeing? My 2cents.
__________________
Steve
  Reply With Quote
Old 20th November 2012, 03:14 AM   #6
wahab is offline wahab  Algeria
diyAudio Member
 
Join Date: Nov 2009
Location: algeria/france
The circuit on the right is from Elektor and can produce close to 200W/4R
according to the author , but this is unlikely given rails voltages sagging
under full load.

A better option would be to use TDA2040 wich are the same chips but with
slightly higher voltage and current ratings.
  Reply With Quote
Old 20th November 2012, 05:07 AM   #7
diyAudio Member
 
Join Date: Jul 2003
Location: Dona paula, Goa
You have to fix these ics on separate heatsinks.

If u see the datasheet, TDA2030 is 18 watts power amp chip.

Gajanan Phadte
  Reply With Quote
Old 20th November 2012, 05:16 AM   #8
diyAudio Member
 
Join Date: Jan 2011
Location: Fosser, Aurskog-Holand, Akershus, Norway.
In both cases the power is given as "peak power", and should not be mentioned as the actual power output of any amplifier in my mind.

Agree with Wahab anyway, and I would used the ELEKTOR Cirquit.
A massive transformer is needed for this one anyway, in the pursuit of having stable rails.
500VA per channel at the very least.
__________________
Sooner or later you end up with TANDBERG
  Reply With Quote
Old 20th November 2012, 06:35 AM   #9
diyAudio Member
 
Join Date: Sep 2011
I used to build these kinds of amps using the TDA2030's. The Elector schematic should work ok, but with amps based on this principle (discrete shunt output transistors), wiring and decoupling of the TDA2030 is extremely important for its stability. And yes, you have to make sure you electrically isolate them all from the heatsink. They're fun to experiment with and you can quickly pump out some watts
__________________
Negative Feedback: The Need for Speed
  Reply With Quote
Old 20th November 2012, 07:11 AM   #10
Boscoe is offline Boscoe  United Kingdom
diyAudio Member
 
Join Date: Feb 2010
Location: England
In theory with enough output pairs and bridged they could achieve 200Wrms 4R. The voltages work out whether the TDAs are actually up to the job or something else gets in the way I don't now.
__________________
I thought about it once, but then thought again.
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
TDA2030A vs LM1875? fakeout Chip Amps 40 13th September 2012 01:01 PM
Which type of amp i an select for surround or how much power i can select udhay_cit Solid State 4 8th September 2012 01:24 PM
TDA2030A distortion caxxxxxx Chip Amps 18 10th July 2011 07:58 PM
tda2030a Heatsink hernanstafe Chip Amps 10 17th December 2007 12:47 PM


New To Site? Need Help?

All times are GMT. The time now is 09:12 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright ©1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2