Dx Blame ST together Dx Super A - Page 49

wiljj78 · 24th January 2013, 01:44 PM

Uncle Charlie,

Is there any possible replacement for this BZV60-C10 Voltage regulator diode??

Regards,

AndrewT · 24th January 2013, 01:52 PM

Looking at the BZV60 datasheet it appears to be a 10V Zener with a 500mW rating.

If that is what you are referring to then any 500mW 10V Zener will do the job.

wiljj78 · 24th January 2013, 02:03 PM

Quote:

Originally Posted by AndrewT

Looking at the BZV60 datasheet it appears to be a 10V Zener with a 500mW rating.

If that is what you are referring to then any 500mW 10V Zener will do the job.

Thanks Andrew.... appreciate your swift response.

Regards

vargasmongo3435 · 24th January 2013, 02:15 PM

Hello guys

Here I have the part number from DigiKey search 568-5796-1-ND and manufacturer part number is , BZX79-C10,143 this is if of course you can order from them.

Regards
Juan

destroyer X · 24th January 2013, 04:41 PM

0.0005A.... so, it is very low....power there is 4 miliwatts.

So, any diode zener will fit, do not worry about the size and watts ratio..even the voltage can be lower or a little bit higher...from 6 to 9 volts will be all right.

regards,

Carlos

wiljj78 · 24th January 2013, 10:06 PM

Quote:

Originally Posted by vargasmongo3435

Hello guys

Here I have the part number from DigiKey search 568-5796-1-ND and manufacturer part number is , BZX79-C10,143 this is if of course you can order from them.

Regards
Juan

Quote:

Originally Posted by destroyer X

0.0005A.... so, it is very low....power there is 4 miliwatts.

So, any diode zener will fit, do not worry about the size and watts ratio..even the voltage can be lower or a little bit higher...from 6 to 9 volts will be all right.

regards,

Carlos

Thank you......

Regards,

vargasmongo3435 · 25th January 2013, 11:09 PM

Hello guys!

I made a really long video of myself putting together the other board it cover a lot, I apologize if I miss some stuff some of the videos were damage on the edition of the video
is just me enjoying the build, I hope you guys find it interesting.

Dx Super A build more than 123 hours - YouTube

Regards
Juan

wiljj78 · 26th January 2013, 12:01 AM

Quote:

Originally Posted by vargasmongo3435

I made this last night the Dx Super A BOM and images so you guys can have and idea what to get, I use DigiKey websites as reference, I personally used DigiKey because they deliver faster to Puerto Rico and shipping for me is lot cheaper too, you guys probably have the supplier of your preference too, I already order parts last night so I hope I can get those parts soon.

Regards
Juan

Hello Juan,

Can you post component guide with tracks in gray color and white background, tracks can no longer be seen on actual printout with this green or blue background, Thanks...

Regards,

vargasmongo3435 · 12:30 AM

Got you Willy !

Regards
Juan

wiljj78 · 26th January 2013, 12:29 AM

Quote:

Originally Posted by vargasmongo3435

Got you Willy !

Regards
Juan

Lovely Juan, Thanks a lot.....

Regards,
Willy

24th January 2013, 01:44 PM	#481
wiljj78 diyAudio Member Join Date: Mar 2012 Location: Bahrain	BZV60-C10 Uncle Charlie, Is there any possible replacement for this BZV60-C10 Voltage regulator diode?? Regards,

24th January 2013, 04:41 PM	#485
destroyer X diyAudio Member Join Date: Feb 2004 Location: Recife - Brasil Northeast	Current that gonna cross this zener diode is half of a miliampere 0.0005A.... so, it is very low....power there is 4 miliwatts. So, any diode zener will fit, do not worry about the size and watts ratio..even the voltage can be lower or a little bit higher...from 6 to 9 volts will be all right. regards, Carlos __________________ Dx Super A - Brazil - Layout Zimmer; http://www.youtube.com/watch?v=yxpYnUA6Bj0

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Dx Blame ST - Builder's thread - post pictures, reviews and comments here please.	destroyer X	Solid State	1665	Yesterday 08:04 AM
Overheating on NEW DX Blame super	DIYGEEK	Solid State	22	28th March 2012 02:30 AM
Where is the original DX Blame ST thread?	johngalt47	Solid State	5	17th March 2012 01:03 PM
Dx Blame MKII, an obvious evolution from the Dx Blame ES/ST	destroyer X	Solid State	4	25th September 2010 06:41 PM
Dx Blame ST, operating from 18 to 24 Volts (unloaded) - Class A	destroyer X	Solid State	51	15th June 2010 10:26 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

24th January 2013, 01:52 PM	#482
AndrewT diyAudio Member Join Date: Jul 2004 Location: Scottish Borders	Looking at the BZV60 datasheet it appears to be a 10V Zener with a 500mW rating. If that is what you are referring to then any 500mW 10V Zener will do the job.

25th January 2013, 11:09 PM	#487
vargasmongo3435 diyAudio Member Join Date: May 2011 Location: Quebradillas, Puerto Rico	Hello guys! I made a really long video of myself putting together the other board it cover a lot, I apologize if I miss some stuff some of the videos were damage on the edition of the video is just me enjoying the build, I hope you guys find it interesting. Dx Super A build more than 123 hours - YouTube Regards Juan