need a hand with TPA3123D2EVM -works with hand on ground - diyAudio
Go Back   Home > Forums > Amplifiers > Solid State

Solid State Talk all about solid state amplification.

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 16th September 2012, 06:11 AM   #1
diyAudio Member
 
Join Date: Sep 2011
Location: Key Largo, Florida
Default need a hand with TPA3123D2EVM -works with hand on ground

I am having trouble getting output from my preamp/amp setup. I only get good output when i stick a finger on a ground point on the amp. If I don't have my finger on the ground, I get about .1 sec of amplification out of each second - it cuts in and out repeatedly.

I have a TPA3123D2 Eval board. I am connecting a dynamic mic with a preamp to the input, in a bridge tied configuration. I am powering the preamp with a 9V battery, and the TPA board with 20 x 1.2V AA cells = 24V. The preamp -out is grounded to it's power supply. I isolated the 9V power ground from the TPA board ground. I have the preamp +out tied to +in on the TPA, and the preamp ground tied to the -in on the TPA. My speaker is tied to +R out and +L out on the TPA.

I tried lots of things to get this to work. I tied to one channel only, but I had some trouble there - don't remember what it did. The tiny little IC did get very hot to the touch and seemed to shut down at one point. The IC does have an onboard shutdown circuit if it overheats.

I suppose I can just bring a wire out of the amp and keep it in my hand when using, but I'd like to know what is happening, if anyone has any ideas.

I've attached the schematic for the bridge tied TPA. The mic preamp I don't have any info on - I bought it from a police supply website supercircuits.com. It outputs line level. Here's the info from the website:

This high gain super mini preamp and microphone is one of the smallest and best in the world. The built-in preamp features low noise, high gain and auto level adjustment by on-board IC, and line level output. This micro audio system comes with a six foot microphone lead and plug and play cable with RCA connections. The system weighs under 1/2 ounce, has line level output, requires 6-15 volts DC, and has a 1 year warranty.

Any and all comments are appreciated!
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
second hand amp6 von Ah Class D 2 2nd November 2009 06:24 PM
please give a hand sifis_samos Multi-Way 10 6th July 2009 12:04 PM
Best transistors to have on hand b gilbert Parts 5 5th May 2009 01:07 AM
Second Hand Turntable mpm32 Analogue Source 5 16th March 2004 09:03 PM


New To Site? Need Help?

All times are GMT. The time now is 11:31 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2