DIYAUDIO Store Speaker Protection - diyAudio
Go Back   Home > Forums > Amplifiers > Solid State

Solid State Talk all about solid state amplification.

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 8th September 2012, 07:15 PM   #1
diyAudio Member
 
BeaufortRalph's Avatar
 
Join Date: Apr 2005
Location: Taos, NM
Default DIYAUDIO Store Speaker Protection

I just finished building the speaker protection board from the store here. I have a mistake somewhere, and need some help troubleshooting the problem.
Upon powerup, both leds light up continuous and the relays close.
I have visually inspected the board and find no obvious problems. I have tested the transistors in place in the circuit and find no shorts.
Introducing dc at one of the amp input points has no effect.

Any Thoughts?

Thanks, Ralph

Click the image to open in full size.
  Reply With Quote
Old 7th October 2013, 06:51 AM   #2
diyAudio Member
 
Join Date: Oct 2013
I realise this thread is old, but I'll post one possible solution on here for those who come afterwards. I had exactly the same issue and it was because I bought alternative transistors for the 2SC945's. The pin-out on the 2SC945's is not typical, and is Emitter-Collector-Base. If you use a substitute transistor you do need to insulate and shuffle the legs around.
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
The diyAudio Store (USA) soon to stock chassis requesting your feedback! Jason Site Announcements 264 9th July 2013 09:02 AM
Speaker protection and delay from diy store BeaufortRalph Solid State 0 6th August 2012 02:48 PM
speaker protection (OR) overload protection myanmar Solid State 7 13th July 2006 08:21 AM


New To Site? Need Help?

All times are GMT. The time now is 12:16 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2