I turned off the amp and let it cool down. When I turned it back on, the left channel had same temperature as right -> problem gone !?
In my understanding the only difference from start-up to start-up can be if the output relays don't always make good contact. Can that explain the higher temperature?
I try to get the problem to surface again and will then measure bias voltages.
In my understanding the only difference from start-up to start-up can be if the output relays don't always make good contact. Can that explain the higher temperature?
I try to get the problem to surface again and will then measure bias voltages.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.