diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Solid State (http://www.diyaudio.com/forums/solid-state/)
-   -   Some questions about Yamaha R-S700 receiver (http://www.diyaudio.com/forums/solid-state/213027-some-questions-about-yamaha-r-s700-receiver.html)

ramiro77 21st May 2012 03:05 AM

Some questions about Yamaha R-S700 receiver
 
Hello.
I was wondering about this receiver.
Iīm looking for a good amplifier with FM tuner.
The amplifier section is equal to the RX-797 or itīs different? Because I have the schematic of the RX-797 and itīs interesting because it has the same specs that the R-S700.
But I couldnīt find schematics for the R-S700.

sgrossklass 23rd May 2012 08:22 PM

R-S700 has a PGA volume control while RX-797 had a volume pot (like A-S700). Probably the power amps will be much the same but the preamp section obviously is another story. A 107 dB(A) SNR spec is pretty good for a PGA-equipped unit though; I'd expect very low noise.


All times are GMT. The time now is 03:56 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright Đ1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2