|Solid State Talk all about solid state amplification.|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
||Thread Tools||Search this Thread|
|28th January 2002, 06:01 PM||#1|
Join Date: Jan 2002
MOSFET Power Follower help
I am trying to build a MOSFET power follower run from +12v and -12v batteries. The -12v is connected to a 3A Constant Current MOSFET. The upper MOSFET is biased for 3A. Both are the same type of N-channel MOSFETS.
So I am looking for MOSFETS that are temperature stable, relative high S, low Ciss, and linear to 8v. They also have to handle 35W of dissapation each.
So any ideas for make / model of MOSFETS? Also looking for an easy CCS using a N-channel MOSFET. (thinking something like the Nelson Pass CCS on the Zen Amp.
I will probably let the batteries drain to about 10v before recharge.
Low drifting is a must. The output is DC coupled to the speaker.
I simulated the circuit and it seems to work ok. THD is very low until clipping.
Any recommendations or ideas are welcome!!!
|Thread Tools||Search this Thread|
|Thread||Thread Starter||Forum||Replies||Last Post|
|MOSFET power follower project||Ilianh||Solid State||19||17th June 2009 03:13 PM|
|Macura dispre with mosfet power follower?||sopapo||Solid State||10||8th May 2006 08:08 AM|
|Does anyone has mosfet PP power follower schematic?||bogdan_borko||Solid State||0||11th December 2005 08:37 PM|
|Driving a MOSFET power follower||RichardJones||Pass Labs||19||22nd July 2002 02:02 PM|
|New To Site?||Need Help?|