diyAudio

diyAudio (http://www.diyaudio.com/forums/index.php)
-   Solid State (http://www.diyaudio.com/forums/solid-state/)
-   -   another jung super regulator pcb layout (http://www.diyaudio.com/forums/solid-state/21059-jung-super-regulator-pcb-layout.html)

peranders 6th October 2003 08:12 PM

Brian, I don't know if you believe or not but in case you don't, just etch a test pcb and test this. The thing is cooling, too fast. You what happens when the tin cools off too fast -> ugly and sometimes bad solder joints.

The last attemt looks just about what I suggested. :up:

Just in case: Put in a capacitor after the output resistor. This for preventing EMI to slipping out. The frequency can be rather high 100 kHz or more. You have good possibilities to filter at the pcb with SMD parts. Maybe 100 (or more) pF NPO can be a good start.

BrianGT 6th October 2003 09:46 PM

Quote:

Originally posted by peranders
Brian, I don't know if you believe or not but in case you don't, just etch a test pcb and test this. The thing is cooling, too fast. You what happens when the tin cools off too fast -> ugly and sometimes bad solder joints.

The last attemt looks just about what I suggested. :up:

Just in case: Put in a capacitor after the output resistor. This for preventing EMI to slipping out. The frequency can be rather high 100 kHz or more. You have good possibilities to filter at the pcb with SMD parts. Maybe 100 (or more) pF NPO can be a good start.

Would I really want to put a ceramic capacitor in there? Is that alright?

--
Brian

peranders 6th October 2003 10:24 PM

Quote:

Originally posted by BrianGT
Would I really want to put a ceramic capacitor in there? Is that alright?
This capacitors should work from 100 kHz and GOOD to above 500 MHz in order to filter good. NP0 has rather good charactersistics. Values is 1 nF (uncommon) to 100 pF depending of demands. You should also think about the frequency properties from the DAC output and forward.

Not this capacitor is optional but have it mind. The I/V converter and the following stage is sensitive when it comes to component choices.

Elso Kwak 10th October 2003 08:34 AM

Re: Re:See also
 
2 Attachment(s)
Quote:

Originally posted by Elso Kwak


See also this paper by Hank Zumbahlen of Analog Devices:
http://www.analog.com/UploadedFiles/...52667AN394.pdf
Fig. 26 on page 11.:cool:

Hi,
Here is a picture of my low noise supply for phonostage or preamp.
Center row IC's from bottem to top: LT1021-5 reference, OP27 low-pass filter, OP07 +5V to -5V converter. BD139/BD140 on coolers. OP27's next to coolers. AD797 can also be used.
;)
It's all from datasheets (REF02, OP176) ;)

tbla 11th October 2003 05:04 PM

whats all the black at the right.......;)

Elso Kwak 11th October 2003 05:38 PM

Black Stuf
 
Quote:

Originally posted by tbla
whats all the black at the right.......;)
Hi Troels,
Phonostage: balanced head amp and phono with RIAA correction.
You want to see it?;)

Raj1 4th February 2004 05:53 PM

Hi,

If building this circuit (jung reg), can I use 0.25watt resistors or must the wattage rating be higher?

Thanks
Raja

eeka chu 22nd January 2007 11:43 AM

How easily could the super reg layout be scaled up to hundreds of volts? 600 say.

peranders 22nd January 2007 11:59 AM

In theory: No problems if you can find the right parts.

In real life: It requires some work....

One big problem may be protection issues and also possible amount of feedback.


All times are GMT. The time now is 03:55 AM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 17.65%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio

Wiki