Pics of my new 4 Channel AMP

[janusz]

Hi Awpagan,

I found it and have already scanned 6 pages covering the schematics and pcb layouts for the RIAA and the reminder of the preamp. The control unit with tone controls has never been published. I forgot about it. The only problem is that these jpg files are large so send me email and I will email these scans directly to you. I did it in Corel Paint. Resolution: 360dpi. Compression factor: 102. I did not want to compress it too much. The largest scan is still 1.7MB. My direct email is:

janusz.pradzynski@dpi.wa.gov.au

Cheers,

[N-Channel]

Mesh,

Looks great! I agree with Donoman, It needs BLUE LEDs!! Lots of 'em!



Steve

[jleaman]

Blue led's is that all people use cant you use something else im so sick of them ugg why not use a nie green or a nice yellow or orange.. blue is so getting over used..

[awpagan]

jansz
sent email
I’ve found the schematics for the preamp and phono section

Also found pcb layouts for everything except phono section.

Main item I could use is the component overlay for the phono pcb.

As I’m missing a three components.



Once i have the preamp working i'll look at ways to improve.
ps
it uses LM394's on the imput!
not bad for published november 1985
for anyone esle which are better LM394 or MAT02?
any opinions?

[poor_lackey]

Hi

is anyone able to provide me with copies of the 6005 articles?

I have a poor copy of part 2, but am missing the rest

Thanks
Tony

[janusz]

Hi Poor Lacky,

I have schematics and the description of AEM6005. Email me directly (address somewhere above in this threat) and I will email these to you. All together 7 pages between 0.7 to 2.1Mb each.

Cheers,