tr substitute

dexter · 16th April 2001, 03:09 AM

HI all,

can I subsitute tr 2SA1302 + 2SC 3281 with 2SA1493 + 2SC5200

what is the substitute for MJE 15030 and 15031
Many thanks for the reply.

sorry my bad.... the tr should be 2sa1943.
how bout 2sc2922 and 2 sa1216 or its bigger brother (300w device)
can it replace sa1302 and sc3281?
please enlightened me on the secret of tr substitution?
what should I look carefully...

please bear with me....
I'm a diy novice and have about zero know how in circuit designing or trouble shooting
miracoulusly though I've built JLH 15W class A (still some hum issue and oscilation from the psu) and a kit power amp using mj 15003 and mj15004

another question
my next project will be the ESP 60 w ( http://www.sound.au.com/project3a.htm )
if I want to paralleling the o/p tr
should i add the emitter resistor to supply voltage or collector resistor to output ?

Thanks alot for your kind attention

[Edited by dexter on 04-16-2001 at 06:19 PM]

grataku · 16th April 2001, 05:39 AM

dexter,
yes, but the case is different and the complementary for the 2sa1493 is the 2sc3857 not the 2sc5200.
I don't know about equivalents for the MJE's.
All the transistors you are looking for are available in the US.

Geoff · 16th April 2001, 08:57 AM

There appears to be some finger error here. I assume that the 2SC1493 in the original query should have read 2SC1943. The Toshiba manual specifically quotes the 2SA1943/2SC5200 as direct replacements for the 2SA1302/2SC3281 (the case size is the same - TO3-P(L)).

Geoff

Geoff · 16th April 2001, 09:46 AM

The MJE15030/MJE15031 are high power/high frequency driver transistors. Depending upon the application, there are a number of substitutes. Assuming that you are looking for drivers for the 2SA1943/2SC5200 then suitable alternatives would be Toshiba's own drivers, either 2SA1837/2SC4793 or 2SA1930/2SC5171. These have the same case (TO-220) as the MJE devices. The 2SA1930/2SC5171 have a higher current rating (2A) than the 2SA1837/2SC4793 (1A) and are nearer to the rating of the MJE15030/MJE15031 (4A).

Geoff

ppl · 28th April 2001, 09:40 AM

Check out the 2SA1006 & 2SC3336 TO-220 types thay are used as drivers in the Mark Lev #23

grataku · 29th April 2001, 02:53 PM

This thread seems to be the appropriate place were to post this link, that maybe is old news:
http://www.pitt.edu/~gszekere/trans.txt
It appears to conver all the basics, too bad there is no Hfe.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
AN630 Substitute	s2kov	Parts	9	27th November 2007 10:11 AM
LF357 J fet op amp substitute?	Original Burnedfingers	Solid State	1	20th October 2007 02:27 PM
2SD873 substitute ?	garnet	Parts	1	27th September 2007 09:32 AM
irfp Substitute	Ipanema	Parts	1	13th January 2005 01:29 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

16th April 2001, 03:09 AM	#1
dexter diyAudio Member Join Date: Apr 2001	HI all, can I subsitute tr 2SA1302 + 2SC 3281 with 2SA1493 + 2SC5200 what is the substitute for MJE 15030 and 15031 Many thanks for the reply. sorry my bad.... the tr should be 2sa1943. how bout 2sc2922 and 2 sa1216 or its bigger brother (300w device) can it replace sa1302 and sc3281? please enlightened me on the secret of tr substitution? what should I look carefully... please bear with me.... I'm a diy novice and have about zero know how in circuit designing or trouble shooting miracoulusly though I've built JLH 15W class A (still some hum issue and oscilation from the psu) and a kit power amp using mj 15003 and mj15004 another question my next project will be the ESP 60 w ( http://www.sound.au.com/project3a.htm ) if I want to paralleling the o/p tr should i add the emitter resistor to supply voltage or collector resistor to output ? Thanks alot for your kind attention [Edited by dexter on 04-16-2001 at 06:19 PM]

16th April 2001, 05:39 AM	#2
grataku diyAudio Member Join Date: Dec 2000 Location: -	dexter, yes, but the case is different and the complementary for the 2sa1493 is the 2sc3857 not the 2sc5200. I don't know about equivalents for the MJE's. All the transistors you are looking for are available in the US.

16th April 2001, 08:57 AM	#3
Geoff diyAudio Member Join Date: Apr 2001 Location: UK	There appears to be some finger error here. I assume that the 2SC1493 in the original query should have read 2SC1943. The Toshiba manual specifically quotes the 2SA1943/2SC5200 as direct replacements for the 2SA1302/2SC3281 (the case size is the same - TO3-P(L)). Geoff

16th April 2001, 09:46 AM	#4
Geoff diyAudio Member Join Date: Apr 2001 Location: UK	The MJE15030/MJE15031 are high power/high frequency driver transistors. Depending upon the application, there are a number of substitutes. Assuming that you are looking for drivers for the 2SA1943/2SC5200 then suitable alternatives would be Toshiba's own drivers, either 2SA1837/2SC4793 or 2SA1930/2SC5171. These have the same case (TO-220) as the MJE devices. The 2SA1930/2SC5171 have a higher current rating (2A) than the 2SA1837/2SC4793 (1A) and are nearer to the rating of the MJE15030/MJE15031 (4A). Geoff

28th April 2001, 09:40 AM	#5
ppl diyAudio Member Join Date: Apr 2001 Location: Seattle, WA U.S.A.	Check out the 2SA1006 & 2SC3336 TO-220 types thay are used as drivers in the Mark Lev #23

29th April 2001, 02:53 PM	#6
grataku diyAudio Member Join Date: Dec 2000 Location: -	This thread seems to be the appropriate place were to post this link, that maybe is old news: http://www.pitt.edu/~gszekere/trans.txt It appears to conver all the basics, too bad there is no Hfe.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)