Ultimate Loudspeaker Protection for Solid State Power Amplifiers

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
about
News | Eminence Speaker
I read - among other very important things - follow:

D-fend™ has eliminated the headaches for speaker engineers – no more hassling with polyswitches, blown lamp filaments, lossy resistors, or slow relays. Incorporating such features as digital signal processing with on-board digital filtering, customizable microprocessor and MOSFET construction, the D-fend™ protection circuit enables a designer to use this technology prior to passive filtration and allows different sensitivity settings in specific frequency bands, such as woofer over-excursion bands or high frequency peak damage regions.

Are there already any experiences concerning this new device from Eminence ?
Evenstar D-fend Speaker Protection Circuit

more URLs:
http://www.diyaudio.com/forums/solid-state/155939-mosfet-relais.html
http://www.diyaudio.com/forums/solid-state/203969-mosfet-based-dc-speaker-protection.html
LASS, SLS Audio Line Array Simulator Software
audio concepts / SLS Audio

BTW - where is to find EMINENCE on this fair:
http://pls.messefrankfurt.com/frankfurt/en/aussteller/willkommen.html

Thanks for an advice.
 
Last edited:
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.