|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Solid State Talk all about solid state amplification. |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
10th February 2012, 08:26 AM
|
#1 |
|
diyAudio Member
Join Date: Feb 2012
|
Behringer A500 and B2031A
I use several of both of these in a project and I believe that there might be issues of the opamps going out of spec.
I am considering modifying the amplifiers in both A500 and B2031A to bypass the opamps and/or installing balanced to balanced, or balanced to unbalanced transformers (if the input circuitry was bypassed) eg Jensen Transformers Jensen JT-11P-1 Line Input Transformer Audio Hum & Noise Eliminators at Markertek.com. To this end I have a copy of the A500 circuit diagram, but not for the B2031A. Anyone have a copy? Cheers, Ian |
|
|
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Behringer A500 as a DIY project | derouineau | Solid State | 165 | 12th January 2013 12:44 PM |
| FS: Behringer A500 | Frosteh | Swap Meet | 1 | 22nd August 2011 03:53 AM |
| Behringer A500 | rene1234 | Solid State | 2 | 4th January 2011 06:13 PM |
| Behringer A500 thumping in one channel | DigAudio | Solid State | 1 | 10th December 2010 10:48 AM |
| Behringer B2031 vs B2031A | -L- | Multi-Way | 1 | 16th August 2004 12:50 PM |
| New To Site? | Need Help? |
