Simple Operational Amplifier Design Considerations

StevenStanleyBayes · 3rd February 2012, 06:44 PM

I have desided to make a quick and simple check list for operational amplifier design.

Please, be kind to comment, review, correct and suggest more things to be included.

StevenStanleyBayes · 7th February 2012, 07:05 PM

I have attempted a SIMPLE explanation of the feedback and the operational amplifier. Takes lots of effort. The end became kinda standard which is what I wanted to avoid. Haven't checked what I wrote. No possibility now.

Any, corrections, comments, errors, additions, suggestions, please, post.

jcx · 8th February 2012, 04:39 AM

who is the audience - what do they already know, how would they use the information?

DF96 · 8th February 2012, 10:42 AM

I think you need to do a lot more reading before you attempt writing on technical issues. More reading will help you with two things:
1. Better understanding of technical issues,
2. Better understanding of how to write clearly.
Is English your first language? In places your writing looks like it has been poorly translated. How many years experience do you have in designing and debugging electronics? Lots of people want to write (including me!) but you have to think about what you can bring to the party which fills a gap left by others. As jcx says, who is your audience?

A line by line critique of your piece would be long and unhelpful.

StevenStanleyBayes · 9th February 2012, 08:28 PM

Any corrections, comments, etcetera, please, shout.

StevenStanleyBayes · 9th February 2012, 08:29 PM

Sorry, have not read any replies for a long time. No possibility now. Another while.

StevenStanleyBayes · 11th February 2012, 01:53 AM

I have just posted an answer but this has been either deleted or, somehow, hasn't gotten posted.

StevenStanleyBayes · 11th February 2012, 01:53 AM

I would wait to see what happens and may post the answe as much as I remember.

StevenStanleyBayes · 19th February 2012, 05:09 AM

Mistakes in the phase shift formulae. Corrected in another post. Eventually, will correct here.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Design simple Stereo Audio Amplifier	az00025	Construction Tips	13	2nd December 2011 05:22 PM
Looking to hire someone to help with simple headphone amplifier design	FasterHorses	Chip Amps	4	17th May 2011 07:45 PM
Accuphase's discrete jFET Input Operational Amplifier for Ultimate Sound Reproduction	tiefbassuebertr	Solid State	3	2nd February 2010 02:09 AM
Dual Operational Amplifier Question?	lindomar	Class D	3	7th October 2007 08:09 PM
need a high voltage operational amplifier!	xiaonan	Chip Amps	6	7th September 2006 04:37 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

8th February 2012, 04:39 AM	#3
jcx diyAudio Member Join Date: Feb 2003 Location: ..	who is the audience - what do they already know, how would they use the information?

8th February 2012, 10:42 AM	#4
DF96 diyAudio Member Join Date: May 2007	I think you need to do a lot more reading before you attempt writing on technical issues. More reading will help you with two things: 1. Better understanding of technical issues, 2. Better understanding of how to write clearly. Is English your first language? In places your writing looks like it has been poorly translated. How many years experience do you have in designing and debugging electronics? Lots of people want to write (including me!) but you have to think about what you can bring to the party which fills a gap left by others. As jcx says, who is your audience? A line by line critique of your piece would be long and unhelpful.

9th February 2012, 08:29 PM	#6
StevenStanleyBayes diyAudio Member Join Date: Jan 2012 Location: Toronto	Sorry, have not read any replies for a long time. No possibility now. Another while.

11th February 2012, 01:53 AM	#7
StevenStanleyBayes diyAudio Member Join Date: Jan 2012 Location: Toronto	I have just posted an answer but this has been either deleted or, somehow, hasn't gotten posted.

19th February 2012, 05:09 AM	#9
StevenStanleyBayes diyAudio Member Join Date: Jan 2012 Location: Toronto	Mistakes in the phase shift formulae. Corrected in another post. Eventually, will correct here.