500 watts power amp to 8 ohm load

[kikoman46]

can anyone kindly give me a pcb design and parts placement guide of an amplifer capable of delivering a staggering 500 watts to an 8 ohm load.
but amplifier with 400 to 100 watts of power into 8 ohms will still be very acceptable. i am a hobbyist with no degree in electronics so i dont have the ability to design one on my own.

god bless and as always, have a nice day..

 

[lanchile]

Do you know how to read an schematic? Here is one.
http://www.diyaudio.com/forums/solid-state/193759-dx-blame-mkiii-hx-builders-thread.html

 

[lanchile]

one easy one!
http://www.diyaudio.com/forums/solid-state/193923-simple-symetrical-amplifier.html

PS: if you want a kit to assemble, here is one really good:
http://www.hdamp.com/M400.html

 

[AndrewT]

Is this another anonymous New Member investigating the opportunities to make a buck or a thousand from the IP on this Forum?

 

[JC Fardo]

PS: if you want a kit to assemble, here is one really good:
2sk1058 2sk2221 irfp9240 mosfet amplifier schematic

Lanchile

I´m not sure if you have built this amp. If you have could you please detail PSU, trafo secondaries , VA and caps uF, softstart if any.
I would like to estimate parts costs, case, heatsinks and so on.

In advance thanks for assistance

Saludos

 

[JC Fardo]

PS: if you want a kit to assemble, here is one really good:
2sk1058 2sk2221 irfp9240 mosfet amplifier schematic

Lanchile

I´m not sure if you have built this amp. If you have could you please detail PSU, trafo secondaries , VA and caps uF, softstart if any.
I would like to estimate parts costs, case, heatsinks and so on.

In advance thanks for assistance

Saludos

Jose Carlos

 

[JC Fardo]

Mr. Moderator please delete double post

Thanks