diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Solid State (http://www.diyaudio.com/forums/solid-state/)
-   -   b-2 amp (http://www.diyaudio.com/forums/solid-state/204555-b-2-amp.html)

leapingknome 15th January 2012 12:58 PM

b-2 amp
 
hello all- currently playing with a yamaha b-2 power amp. yep...its got blown v-fets. has anyone out there come up with subs or circuit mods to compenstae for the impedance factors of the v-fets?
regards, leapingknome

CBS240 15th January 2012 10:34 PM

Hi

That is unfortunate if they are blown. Those special devices are very difficult to get, and even if you can find someone who has them, they will want an arm and half a leg for them, that is if they know what they are. If I'm not mistaken, those are normally on devices so if you are measuring Rds with them out of the circuit they should show up as nearly a short. You can build a test rig to be sure, Vp should be ~10V.


All times are GMT. The time now is 10:48 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2