This power amp looks kinda like Threshold's CAS-1 (from the face view) go to
Threshold Model CAS-1
and
http://www.diyaudio.com/forums/pass-labs/152646-threshold-cas-1-a.html
http://www.diyaudio.com/forums/pass...overview-schematic-collection-all-models.html
And the brand name sounds like Craaft Audio from Germany (the roof of the brand NOVA© resp.NOVACOUSTIC©).
Company
SOLTON® :: aaCRAAFT®: Home
SOLTON® :: aaCRAAFT®: Analog Amplifiers
From this NZLD brand, model "CA-1" (CA1) I want to have a schematic diagram.
Who can post this?
first four images shows this amp, the other attachments German's models of Craaft
Thank you very much
Threshold Model CAS-1
and
http://www.diyaudio.com/forums/pass-labs/152646-threshold-cas-1-a.html
http://www.diyaudio.com/forums/pass...overview-schematic-collection-all-models.html
And the brand name sounds like Craaft Audio from Germany (the roof of the brand NOVA© resp.NOVACOUSTIC©).
Company
SOLTON® :: aaCRAAFT®: Home
SOLTON® :: aaCRAAFT®: Analog Amplifiers
From this NZLD brand, model "CA-1" (CA1) I want to have a schematic diagram.
Who can post this?
first four images shows this amp, the other attachments German's models of Craaft
Thank you very much
Attachments
-
CraaftAudio CA1 front.jpg53.2 KB · Views: 444
-
Craaftaudio CA1 openIl.jpg51 KB · Views: 456
-
Craaftaudio CA1 openl.jpg40.9 KB · Views: 407
-
Craaftaudio CA1 openlII.jpg42.5 KB · Views: 378
-
Craaft CPA1202.jpg136.4 KB · Views: 379
-
craaft cpa1200 front.jpg61.7 KB · Views: 314
-
Craaft clone TA2400.jpg161.9 KB · Views: 341
-
Craaft bass-ad18174_big.JPG33.6 KB · Views: 210
Last edited:
This power amp looks kinda like Threshold's CAS-1 (from the face view) go to
Threshold Model CAS-1
and
http://www.diyaudio.com/forums/pass-labs/152646-threshold-cas-1-a.html
http://www.diyaudio.com/forums/pass...overview-schematic-collection-all-models.html
And the brand name sounds like Craaft Audio from Germany (the roof of the brand NOVA© resp.NOVACOUSTIC©).
Company
SOLTON® :: aaCRAAFT®: Home
SOLTON® :: aaCRAAFT®: Analog Amplifiers
From this NZLD brand, model "CA-1" (CA1) I want to have a schematic diagram.
Who can post this?
first four images shows this amp, the other attachments German's models of Craaft
Thank you very much
Craaft OEM chinese origin Manufacturer is REGAL Home page
since many years..in 2006 I did buy from Regal and Craaft
you can write me in german by private message
Craft Audio
Hi,
Re Ca1 amplifier. Gary Morrison designed the Craft Audio CA1 and CA2.
Try the details below
https://twitter.com/GaryMorrison
The latest from Gary Morrison (@GaryMorrison). Co founder of PureAudio. See us at http://www.pureaudio.co.nz, follow us via @pureaudio. Wellington, New Zealand
Hi,
Re Ca1 amplifier. Gary Morrison designed the Craft Audio CA1 and CA2.
Try the details below
https://twitter.com/GaryMorrison
The latest from Gary Morrison (@GaryMorrison). Co founder of PureAudio. See us at http://www.pureaudio.co.nz, follow us via @pureaudio. Wellington, New Zealand
Last edited:
Hi Guys,
Just got my self one of these
tiefbassuebertr you have the CA1 'B' model which was the mkII
The original came out in 1981 and was Gary Morrison's first Audo project
My PCB'd are dated (c) 1986, I think this might have been a small update on original
I got it with (Unknown at time) issues with the powersupply
I was getting +45vdc on the +ve rail and -100vdc on the -ve
I traced it down to a bad 0v lead on the transformer
Now DC power is a steady +-72.4v
But I'm having issues with one channel
I think the -100v may have done some damage
Nothing obvious to the eye
This channel/PCB no matter where BIAS is set to the MODFETs stay cool as do the RCA1A11/1A10
Other channel/board looks in better shape, but still 29years old
The bias adjust here will heat up the MODFETs and RCA1A11/1010's
I don't have any speakers worthy of testing properly yet, rebuilding my audio empire from scratch.
The old 100w 4way car speakers are my test bed.
I've got a B&K Pro 10MC pre-amp coming (mkI version with only volume/balance and source)
I get sound from both channels, very pleasing on the ears, great channel separation so giving me hope to restore this oldy
Just not sure if its worth it, the 2SK134/2SJ49 pairs are going to hard to replace if needed as no doubt the RCA1A11/1A10 pair also
Anyway, if someone has a Circuit diagram for one of these, that would help a whole heap.
And any helpful advice wouldn't go astray
Just got my self one of these
tiefbassuebertr you have the CA1 'B' model which was the mkII
The original came out in 1981 and was Gary Morrison's first Audo project
My PCB'd are dated (c) 1986, I think this might have been a small update on original
I got it with (Unknown at time) issues with the powersupply
I was getting +45vdc on the +ve rail and -100vdc on the -ve
I traced it down to a bad 0v lead on the transformer
Now DC power is a steady +-72.4v
But I'm having issues with one channel
I think the -100v may have done some damage
Nothing obvious to the eye
This channel/PCB no matter where BIAS is set to the MODFETs stay cool as do the RCA1A11/1A10
Other channel/board looks in better shape, but still 29years old
The bias adjust here will heat up the MODFETs and RCA1A11/1010's
I don't have any speakers worthy of testing properly yet, rebuilding my audio empire from scratch.
The old 100w 4way car speakers are my test bed.
I've got a B&K Pro 10MC pre-amp coming (mkI version with only volume/balance and source)
I get sound from both channels, very pleasing on the ears, great channel separation so giving me hope to restore this oldy
Just not sure if its worth it, the 2SK134/2SJ49 pairs are going to hard to replace if needed as no doubt the RCA1A11/1A10 pair also
Anyway, if someone has a Circuit diagram for one of these, that would help a whole heap.
And any helpful advice wouldn't go astray
Profusion PLC (UK & Europe) have been marketing their Exicon branded TO3 replacement for these LATFETs and the higher rated 2SK135/J150 pair, for decades now: Lateral MOSFET.....Just not sure if its worth it, the 2SK134/2SJ49 pairs are going to hard to replace if needed as no doubt the RCA1A11/1A10 pair also....
Farnell/Element 14 also market the OEM ALFET branded versions: TT electronics Semelab Limited - Magnatec Lateral MOSFETs for Audio
Google brings up several existing threads about these TO3 types and other LATFETs here on DIYaudio.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Amplifiers
- Solid State
- Craft Audio CA1 (CRAFTAUDIO CA-1) Power Amp - looks like CAS-1 - Schematic wanted