Hafler TA-1100 finally fixed!

cycosuicide · 10th January 2012, 04:45 AM

Ok gang, thanks to you I fixed my Hafler TA-1100 amplifier. I tried the fix which was mentioned here and another site which was to replace C21 and C22. These are El Caps. I replaced C21 and C22 on both the left and right side.

When I fired it up, I got sounds out of both sides which I didn't have before. Yay! But wait, there was very little bass coming through my Even 20/20s. So I searched the web again and found lack of bass to be a common problem with this amp after awhile. So I took their suggestion and completely recapped all of the electrolytics.

I fired up the amp again, and for now the amp seems to sound almost like I remember. I am going to let it burn in for a couple of days and post back about the sound. But for now, it appears I have finally brought this thing back to life.

10th January 2012, 04:45 AM	#1
cycosuicide diyAudio Member Join Date: Dec 2011	Hafler TA-1100 finally fixed! Ok gang, thanks to you I fixed my Hafler TA-1100 amplifier. I tried the fix which was mentioned here and another site which was to replace C21 and C22. These are El Caps. I replaced C21 and C22 on both the left and right side. When I fired it up, I got sounds out of both sides which I didn't have before. Yay! But wait, there was very little bass coming through my Even 20/20s. So I searched the web again and found lack of bass to be a common problem with this amp after awhile. So I took their suggestion and completely recapped all of the electrolytics. I fired up the amp again, and for now the amp seems to sound almost like I remember. I am going to let it burn in for a couple of days and post back about the sound. But for now, it appears I have finally brought this thing back to life.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
EL84 fixed fixed bias	razorrick1293	Tubes / Valves	3	20th November 2011 03:33 PM
My CDM1 Mk.II is finally fixed!, but now I have a question on the caps used	tonyptony	Digital Source	5	19th February 2011 10:57 PM
Hafler TA-1100 Thread	Zero Cool	Solid State	3	9th December 2009 03:20 PM
Hafler TA 1600 Problems	iron25	Solid State	1	15th September 2008 08:43 PM
Sony TA-N1 and TA-NR1, how do they sound?	lumanauw	Solid State	0	28th November 2006 01:51 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)