|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Solid State Talk all about solid state amplification. |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
20th October 2011, 03:14 AM
|
#1 |
|
diyAudio Member
Join Date: Apr 2011
Location: parts unknown
|
a breakdown of the component part function for a tda7384 amp ic circuit?
hello diyaudio, what is the function of each of the component parts of the application circuit in the datasheet for the tda7384 ic and the other related chips that can substitute for it (like the pal00*/tda7560 chip pioneer uses in their mosfet50 amp). i am asking because i have already built a simple amplifier around this chip for a scoche boombox and would like to improve the amp's ability to be able to play the more difficult low notes and musical peaks better without breaking up as easily, so it can have better transient response. the amp sounds GREAT now (especially with it being made from scratch), but i would like to improve the circuit.
the datasheet doesn't show a thorough enough breakdown of what the component parts are for and I would like to get some info from those who have tinkered with this type of diy amplifier please (perry babin, if you are there, please get back to me). any ideas? |
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Audio amp. to IXFH26N50, please, suggest me an application/circuit to this component | destroyer X | Solid State | 4 | 16th December 2009 01:03 PM |
| indonesia, high end component part | milen007 | Everything Else | 1 | 5th May 2008 02:28 PM |
| Circuit Diagram / Schematic & Full Manual 4 Crown Ic-150 Pre Amp Wanted | thermal runaway | Solid State | 3 | 1st May 2008 04:15 PM |
| 4-part Harmony, a 9 watt class A amp using a voltage regulator IC. | Circlotron | Solid State | 47 | 24th August 2006 12:27 PM |
| MAX038 Function Generator IC? | hifiZen | Parts | 40 | 26th December 2002 08:51 PM |
| New To Site? | Need Help? |
| Page generated in 0.06568 seconds (65.54% PHP - 34.46% MySQL) with 10 queries |
