diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Solid State (http://www.diyaudio.com/forums/solid-state/)
-   -   Krell ksa 100 ksa100 mkII mk II ksa50 50 GERBER gerbers pcb files project (http://www.diyaudio.com/forums/solid-state/198505-krell-ksa-100-ksa100-mkii-mk-ii-ksa50-50-gerber-gerbers-pcb-files-project.html)

xslavic 14th October 2011 12:01 PM

Krell class A
 
2 Attachment(s)
Hello
i wanted to re-upload the project files for KRELL class A( Drilled ) + output boards made by me, for 2sa1943 , 2sc5200
I used Altium Designer 10
Output boards not tested yet - but made correctly

ingenieus 14th October 2011 12:51 PM

Is there a thread where I can find the circuit diagram?

xslavic 14th October 2011 01:15 PM

Search Google or any other Search engine for diagram or just open the GERBER 'S

xslavic 14th October 2011 01:16 PM

GOOD LUCK -if you decide to build My build costed me 650 euros ,with enourmous transformer and 4 transistor pairs

xslavic 28th October 2011 07:56 PM

1 Attachment(s)
i now add the Part list

Junie 28th October 2011 08:51 PM

Please post a layout in PDF, big thanks.

xslavic 4th December 2011 09:30 PM

1 Attachment(s)
Here is new OUTPUT BOARD GERBER layout ksa 100 mk II mkII using 2sa1943 2sc5200

wolfintosh 31st July 2015 06:51 AM

Hey could you please send me your altium filemplease i need to use iron methot regard
 
Quote:

Originally Posted by xslavic (http://www.diyaudio.com/forums/solid-state/198505-krell-ksa-100-ksa100-mkii-mk-ii-ksa50-50-gerber-gerbers-pcb-files-project-post2745466.html#post2745466)
Hello
i wanted to re-upload the project files for KRELL class A( Drilled ) + output boards made by me, for 2sa1943 , 2sc5200
I used Altium Designer 10
Output boards not tested yet - but made correctly


alibear 31st July 2015 10:54 AM

Hi everyone, if anyone is interested in building a Krell KSA100Mk 2, I have collected most of the parts that are needed.
I have:
P.Watts PCB's built (Dale resistors, Blackgate, etc.) Tested but unused.
Heatsink towers for TO3 almost identical looking to original that Krell used
Papst fans ( new )
Mallory / Sprauge capacitors
Enclosure that will house parts
Signal Transformers 80-25 2Kva, not new, not toroidal
If interested send PM and I will get back to you.
Regards
Alan

Junie 1st August 2015 01:22 PM

Hi Alibear,

I'm interested on heatsinks, kindly PM me the price. Thanks.

BR,
Junie


All times are GMT. The time now is 11:53 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.
Copyright 1999-2016 diyAudio


Content Relevant URLs by vBSEO 3.3.2
Wiki