Thank You Mr. Harrison for giving me the pcb,s for this amp. @ friends of mine helped me built this 1 channel of a great sounding amp. My power supply is giving me 45+ 45-at 500va. I,m using 66,000 mfd caps. I changed the Front end to a i cap input of 2.7uf this is all I had at the moment. The output is biased at 65ma,,offset is only 2,5mv- The sound is WOW Great amp. Thanks again Mr. Harrison. Evette
I was thinking one of those two
4"-6" of this one
10.080" - HeatsinkUSA, LLC Store
or
4"-6" of this one
10.000" - HeatsinkUSA, LLC Store
Do
4"-6" of this one
10.080" - HeatsinkUSA, LLC Store
or
4"-6" of this one
10.000" - HeatsinkUSA, LLC Store
Do
To get the thermal resistance call them or read this
Estimating Parallel Plate-Fin Heat Sink Thermal Resistance Electronics Cooling Magazine – Focused on Thermal Management, TIMs, Fans, Heat Sinks, CFD Software, LEDs/Lighting
Estimating Parallel Plate-Fin Heat Sink Thermal Resistance Electronics Cooling Magazine – Focused on Thermal Management, TIMs, Fans, Heat Sinks, CFD Software, LEDs/Lighting
- Home
- Amplifiers
- Solid State
- SYMEF amplifier