|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Solid State Talk all about solid state amplification. |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
11th September 2011, 01:04 PM
|
#2 |
|
diyAudio Member
Join Date: Sep 2004
Location: hobart tasmania
|
So many variables and unknowns, a bit like I have some shoes where should i walk ?
a 2n3055 is a readily available TO3 as is a MJ15003 PSU Voltage ? Topology? Current Bias? Differential pair ? Opamp ? You could study many of the fine Solid State Amps published at DIY Audio A simple L pad arrangement resistor preamp usually works straight away. Cheers / Chris |
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Driver stage to finals newbie questions - (I hope not dumb questions) | rongon | Tubes / Valves | 15 | 13th June 2011 08:29 PM |
| Some Quad els57 questions! - Novice Questions! | Fanuc | Planars & Exotics | 13 | 5th December 2007 09:26 AM |
| pre-amp question many questions | AudioGeek | Solid State | 0 | 17th November 2005 10:05 PM |
| 2 general gainclone questions, and an lm1875 question | Adam M. | Chip Amps | 11 | 4th March 2005 11:53 AM |
| Questions, questions, from newb DIYer | Phatman91624 | Multi-Way | 41 | 3rd August 2002 02:52 AM |
| New To Site? | Need Help? |
| Page generated in 0.07034 seconds (64.52% PHP - 35.48% MySQL) with 10 queries |
any question...some questions?
