diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Solid State (http://www.diyaudio.com/forums/solid-state/)
-   -   TRACE ELLIOT ... (http://www.diyaudio.com/forums/solid-state/196258-trace-elliot.html)

east electronics 9th September 2011 12:55 PM

TRACE ELLIOT ...
 
1 Attachment(s)
any Trace elliot experts here ???

what actually troubles me .... since i have no problems repairing it but looking at the schematics it seems to me that rated power is way overestimated

in the attached schematic the output is made out of 4 transistors tip 35-36 that is way too low for 150-300W

i would say that tis is safe enough for clean no distortion 100W ...

any opinions ???

jez 9th September 2011 02:02 PM

Into a 4 Ohm load that should be no problem. The TIP35/36 is a slow but powerful pair (25A rated IIRC).


All times are GMT. The time now is 10:58 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2