Nikoo A-300D, recapping dilemma...

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Me too ...!!
I recapped totally a Nikko TRM 600 three months ago
And I'm thinking of eliminating all the knobs ....:rolleyes::mad:
well , that would be a new amplifier .
Because it has a separation between pre and amplifier stages , in the
end I much preferred to use a separated and specialized preamplifier.
The preamplifier is the real bottleneck of the project , though it does its
duty decently ( you wouldn't believe it after seeing the schematics : transistor>coupling cap;transistor>coupling cap;etc ) Also , after having substituted the supply caps from
6m8 to 10 mF , I had encountered another big bottleneck which was the wiring to the speaker selector , then the switches , then the 'surge' protection
and eventually the binding posts . I removed them and put big wires and binding posts ( the wires, I used them for my mid-tweeter )
Indeed , many clever people say ' do not mess with old amps and don't touch or change anything' ....:p:):confused:

Congrats on that.. And now that you have seen my latest predicament... I am not really sure what to do :(
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.