Amplifier testing on PC with DAAS
I want to test amplifier (150W + 150 W) in bridge mode with 8 ohms impedance. As the amplifier outout is more i need to attenuate it -6db.
is it safe to use just L pads with high power resistors 4 ohms & 8 ohms.
4 ohms will in series & 8 ohms will in parallel to load.
I am looking for guidance from fellow members.
|All times are GMT. The time now is 12:47 PM.|
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.
Copyright ©1999-2016 diyAudio