Sansui AU-6900 Questions and problems - diyAudio
Go Back   Home > Forums > Amplifiers > Solid State

Solid State Talk all about solid state amplification.

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 31st August 2011, 08:37 PM   #1
josping is offline josping  Spain
diyAudio Member
 
Join Date: Aug 2011
Default Sansui AU-6900 Questions and problems

Hello everyone, I'm from Spain, and I rescued from the trash a Sansui Au-6900, I stimate was not used in the past 20 years. when i power it up the light comes on in the front but nothing, no sound or anything, someone can tell me if today can repair this amplifier?
Another question I have is that the back comes with a red label in the connections "Pre Out, Main In" that says exactly.
"IMPORTANT, do not insert these pin plugs into jacks other tan PHONO. inserting them into certain jacks will cut sound off"
it curious that two pin plugs were coming in those two connections inserted "pre out, main in" do I can take or leave?, must be inserted somewhere specific?
What usefulness have they these pin plugs?
And last question: Over the connectors "Pre Out, Main In" is a switch that says "PRE-MAIN" and has two positions "separated and connected" in that position should be set?
thank you very much everyone.
Regards.
Click the image to open in full size.
  Reply With Quote
Old 1st September 2011, 12:19 PM   #2
sregor is offline sregor  United States
diyAudio Member
 
Join Date: Jan 2006
Location: massachusetts
The red tage and the shorting pins should be at the phono inputs only. They will cause no output if put in the pre-main jacks. The switch is normally in the connected position - it is for using an external amp with the 6900 acting as preamp, or to use a different preamp with the amp section of the 6900, or for connecting up crossover and amplifier(s) for biamping speakers. As an aside - sometimes dirt or corrosion on that switch can cause intermittent problems, but not usually no output. IMO it is a very nice midrange amplifier. Hope you get it working.
__________________
Steve
  Reply With Quote
Old 1st September 2011, 08:40 PM   #3
diyAudio Member
 
east electronics's Avatar
 
Join Date: Jan 2006
Location: Athens GREECE
also placing the "short circuit" plugs to any tape out will also mute the amplifier ...correct said these are only to be used in the phono inputs only if these are not used by actuall phono system .

Your amplifier will need restoring eventhough might have not been on duty for very long time its a fact that al elctrolyticapacitors inside are not working any more ...

kind regards sakis
__________________
SERVICE ΕΝΙΣΧΥΤΩΝ ΚΑΙ ΙΑΠΩΝΙΚΩΝ ΜΗΧΑΝΗΜΑΤΩΝ ΗΧΟΥ www.eastelectronics.gr
  Reply With Quote
Old 1st September 2011, 09:30 PM   #4
diyAudio Member
 
Join Date: Apr 2003
Location: Portland,Oregon
Blog Entries: 4
Send a message via AIM to DigitalJunkie
It should be a good amp,worth fixing up,IMO.
I have an (original) AU-7900 that I've been using for years,it's a great amp. One of these days I'll get around to putting some new caps in it.
  Reply With Quote
Old 1st September 2011, 09:37 PM   #5
diyAudio Member
 
firechief's Avatar
 
Join Date: Sep 2008
Location: Near Seattle Wa
Take a picture of the front with it turned on, post the picture. Connect speakers, put your ear right next to the speaker, and turn on the power. Do you hear anything? Turn on thump or hiss? Get back to us.
__________________
"You can keep your insurance baby nothing is guaranteed" -Tom Petty
  Reply With Quote
Old 2nd September 2011, 01:29 AM   #6
josping is offline josping  Spain
diyAudio Member
 
Join Date: Aug 2011
Hello, thank you very much for all the responses have been helpful. This amp I rescued from the trash for 4 years ago, with another amp, a Marantz model 1090 and 4 speakers Marantz HD550. The Marantz work from the first day, only use a dielectric cleaner, to clean the controls because they made some noise when using some controls, but the Sansui never worked, but of course, had the "short circuit" pin plugs placed in pre-main, anyway yesterday I tried them out and still no sound.
As I did not know what else to try I came up with two RCA cables plug "pre out" on Sansui amp with "main in" in the Marantz. input source in the Sansui and speakers on Marantz and passes the sound to the speakers but I did not expect is that the volume control that worked was the Sansui and not the Marantz. Anyway, the tone controls, filters and loudness in the Sansui did not work but the Marantz, nor.
Having done this test with the switch "PRE-MAIN" in a "separated" position i heard a little "thump" on the speakers and turn off too. But if I change the switch to "connected" position, within 2 seconds of power on the amplifier, starts making a loud noise in the speakers force you to shut down the amplifier instantly.
I wanted to tell you something else is very rare and donīt know if I'm going crazy. when I made this connection when you turn on the amp did not hear the sound of the source that had connected it was a sound "no noise" was is like a sound test, several recurring melodies. Is this possible?
thanks
Regards

EDIT:
Another thing to ask, forgive me if I'm annoying, I'm looking online and seen several photographs like this, why would you put those bridges in the pre-main connections.Click the image to open in full size.

Last edited by josping; 2nd September 2011 at 01:45 AM.
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
sansui au-6900 newf Solid State 8 25th May 2010 02:08 AM
Sansui AU 11000 jeff11 Solid State 8 30th January 2010 11:18 AM
Got any Sansui au-6900 SM, schematics or whatever? taj Solid State 0 1st January 2009 12:16 AM
Sansui AU-3900 mot on/off Solid State 18 30th May 2007 05:10 PM
Sansui Au-517&au-717 ManUtd Solid State 4 29th March 2004 02:13 AM


New To Site? Need Help?

All times are GMT. The time now is 03:11 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright Đ1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2