|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Solid State Talk all about solid state amplification. |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
9th August 2011, 09:34 AM
|
#1 |
|
diyAudio Member
Join Date: Mar 2011
|
sink or not ?
i have built a quad 405 clone drivers are tip 42c do i need to heatsink ? if so can i use to220 ind clip on heatsinks and not on main heatsink with output devises .i have only recently gone back to diy after 40 yrs then it was tetrodes and pentodes ect so i am rusty regards solid state any and all advise appreciated bernard
|
|
|
9th August 2011, 10:46 AM
|
#2 |
|
diyAudio Member
Join Date: Nov 2005
Location: San Antonio TX
|
I don't think clip-on heatsinks will be sufficient. See the other recent heatsink threads. You'll probably need a main heatsink to get the required low thermal resistance. I sometimes use 2 smaller heatsinks and bolt them front and back of the tab, but it seems you'd be very fortunate to get away with that here.
__________________
It is error only, and not truth, that shrinks from enquiry. - Thomas Paine |
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Is this heat sink OK? | portreathbeach | Chip Amps | 5 | 28th February 2010 11:56 AM |
| my heat sink picture | space2000 | Solid State | 37 | 20th July 2008 08:59 AM |
| How much heat sink is necessary? | rosss | Pass Labs | 11 | 23rd February 2003 05:23 AM |
| Help with Current Sink | RichardJones | Pass Labs | 1 | 31st January 2002 04:52 PM |
| New To Site? | Need Help? |
| Page generated in 0.05953 seconds (78.74% PHP - 21.26% MySQL) with 10 queries |
