|
|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Solid State Talk all about solid state amplification. |
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
|
|
|
Thread Tools | Search this Thread |
|
|
#1 |
|
diyAudio Member
Join Date: Jul 2011
|
Hello all,
1st time poster on this interesting forum. I'm a tv repair tech (Boca Raton, Florida), and recently had someone bring me a Concept Audio amp; the actual model number is no longer anywhere on unit, but noticed an earlier ad from [Mauquill], who had the exact same issue, which is there are 12 MOSFET (to-220) transistors dead shorted in this unit. Do not have the schematic, but proceeded to find all three 25A fuses were open, and with the before-mentioned shorted transistors. Performed resistance checks across all the output transistors and other solid-state devices including the caps, and found nothing else out of norm. Replaced the IRFZ44N transistors, with same value good transistors, and applied 12v to both 12 and REM, and transistors shorted ONCE again. I would appreciate if anyone has the schematic/diagram, or at least confirm that these are the correct value transistors. Thanks, Ralf |
|
|
|
|
#2 |
|
diyAudio Member
Join Date: Jun 2004
Location: Dorset, UK
|
Would this not be better posted in the Car Audio section here < Car Audio - diyAudio >
|
|
|
|
|
#3 | |
|
diyAudio Member
Join Date: Jul 2011
|
Quote:
Will repost in that section. |
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
|
|
|
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| for sale: concept hp-1000 car amp | ernie cosillos | Swap Meet | 0 | 24th May 2011 06:34 PM |
| WTB: old school power acoustik 1 Ohm 2400-2 amp | stickpony | Swap Meet | 2 | 25th February 2011 10:50 PM |
| nad 2400 thx amp schematic | steven344 | Solid State | 3 | 9th October 2008 04:56 AM |
| SAE 2400 amp needs help | scm | Solid State | 8 | 2nd July 2007 10:08 PM |
| Need help with Concept Audio ccd-2400 amplifier | mauguill | Car Audio | 2 | 5th February 2004 10:40 PM |
| New To Site? | Need Help? |
| Page generated in 0.06377 seconds (78.84% PHP - 21.16% MySQL) with 10 queries |