What amp/amps boards would you like to see produced for your project?

Boscoe · 24th June 2011, 11:46 AM

Basically after THIS thread I have managed to get the interest of Carlos the designer of the DX amps and jims_audio the manufacturer and distributor.

Carlos has given me permission to give jims_audio permission to use his designs and produce PCBs for them, I would like to know which of Carlos' DX amps you would like to see produced and go on sale? I would also like to know which general designs you would like to see have PCBs made for? i can then get into contact and sort something out.

The deisgns chosen with have PCBs designed for them then the layouts will be published on here to see if there's anything you would like to see changes or whatever.

Thanks
Boscoe.

lineup · 24th June 2011, 11:50 AM

There are so many 'DX' amplifiers.
Several of them are just a variant of the first.
And there are MKI, MKII etc...
'DX Precision' is good.

Bigun · 24th June 2011, 03:42 PM

I thought there was a pcb design that allowed for some variations on the DX theme - this might be a good option.

I see threads from time to time asking 'what amp to build' and I often point people to DX - having a source of pcb's makes that even better advice.

kevinkr · 24th June 2011, 03:47 PM

Thank you for getting permission and documenting it here, this is the right course of action for the forum and this thread..

Quote:

Originally Posted by Boscoe

Basically after THIS thread I have managed to get the interest of Carlos the designer of the DX amps and jims_audio the manufacturer and distributor.

Carlos has given me permission to give jims_audio permission to use his designs and produce PCBs for them, I would like to know which of Carlos' DX amps you would like to see produced and go on sale? I would also like to know which general designs you would like to see have PCBs made for? i can then get into contact and sort something out.

The deisgns chosen with have PCBs designed for them then the layouts will be published on here to see if there's anything you would like to see changes or whatever.

Thanks
Boscoe.

digits · 25th June 2011, 12:36 AM

DId you get permission from the designer of the precisoin boards themselves?

Boscoe · 25th June 2011, 07:38 PM

Quote:

Originally Posted by digits

DId you get permission from the designer of the precisoin boards themselves?

For any design of his.

Would anyone want to see the goldmund clone produced? If so could someone point me to a good layout and the corresponding schematic.

Thanks

24th June 2011, 11:46 AM	#1
Boscoe diyAudio Member Join Date: Feb 2010 Location: England	What amp/amps boards would you like to see produced for your project? Basically after THIS thread I have managed to get the interest of Carlos the designer of the DX amps and jims_audio the manufacturer and distributor. Carlos has given me permission to give jims_audio permission to use his designs and produce PCBs for them, I would like to know which of Carlos' DX amps you would like to see produced and go on sale? I would also like to know which general designs you would like to see have PCBs made for? i can then get into contact and sort something out. The deisgns chosen with have PCBs designed for them then the layouts will be published on here to see if there's anything you would like to see changes or whatever. Thanks Boscoe. __________________ I thought about it once, but then thought again.

24th June 2011, 11:50 AM	#2
lineup diyAudio Member Join Date: Dec 2005 Location: the north	There are so many 'DX' amplifiers. Several of them are just a variant of the first. And there are MKI, MKII etc... 'DX Precision' is good. __________________ lineup

24th June 2011, 03:42 PM	#3
Bigun diyAudio Member Join Date: Jan 2009 Location: K-W Ontario Blog Entries: 2	I thought there was a pcb design that allowed for some variations on the DX theme - this might be a good option. I see threads from time to time asking 'what amp to build' and I often point people to DX - having a source of pcb's makes that even better advice. __________________ "The test of the machine is the satisfaction it gives you. There isn't any other test. If the machine produces tranquility it's right. If it disturbs you it's wrong until either the machine or your mind is changed." Robert M Pirsig.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FS: Conrad Heatsinks;.... 'PASS' B1 boards w/JFETS;...... F4 AMP & PSU boards	cowboy99	Swap Meet	5	25th August 2009 02:39 AM
Swaping preamp boards on JL amps	ItsCustom	Car Audio	2	11th January 2009 01:16 AM
Urgent sale of NOS (produced in 1996) PCM63 "K" grade DAC's.	Altmustech	Swap Meet	1	27th August 2006 10:56 AM
Urgent sale a lot of NOS (produced in 1996) PCM 63 "K" grade!	Altmustech	Parts	0	26th August 2006 11:41 AM
Circuit boards For Aleph amps	labjr	Pass Labs	16	10th May 2003 03:11 AM


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

25th June 2011, 12:36 AM	#5
digits diyAudio Member Join Date: Apr 2011	DId you get permission from the designer of the precisoin boards themselves?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read