I have a Threshold stasis 2 amp. I freaking love this unit. I am looking to integrate Vandersteen subs with my main speakers. For this they have a crossover that you put inbetween your preamp and amp. I need to know the input impedance of the stasis 2. I received 2 very different answers. First, Jon Soderberg said it is 15k... I have used him to rebuild in the past and trust him.. Second I emailed Threshold company they told me it was 75k. I have not worked directly with Threshold in decades. So I am leaning toward Jon being correct but decided to post here to try and get a third opinion.
Thanks in advance for your time.
Taam
Thanks in advance for your time.
Taam
I emailed Nelson to check again. Here is his response.
--The input impedance is 75K. There is a 4.75K resistor and then a 10K resistor,
but apparently Jon does not understand that the 10K has been bootstrapped to
a 70K value.--
I wanted to post this in case anyone else is searching for this information in the future.
--The input impedance is 75K. There is a 4.75K resistor and then a 10K resistor,
but apparently Jon does not understand that the 10K has been bootstrapped to
a 70K value.--
I wanted to post this in case anyone else is searching for this information in the future.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.