My new amplifier project

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
This is my new project.
I just finished the planning of the circuit. The prototype tested, but with BD249C/250C output device (I don't want to sacrifice my MJLs, in any case of failure)
The output is 60W/8ohms in class A, and the amplifier can gives about 250W/2ohms before clipping.
Now I planning the PCB, which will contains all parts (I hope), included the psu capacitors.


Sajti

An externally hosted image should be here but it was not working when we last tested it.
 
HBarske said:
No, doesn't work.
May work for you because you already have the picture in your browser cache.
Perhaps you might try to attach it to a posting?


We try the download picture with my collegue's PC. He never see it before. It works.
If any body can put it up to his site, I will send it by mail.

Thanks: Sajti
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.