Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Solid State Talk all about solid state amplification.

Diode types, what to choose.
Diode types, what to choose.
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 12th August 2003, 10:17 PM   #1
JojoD818 is offline JojoD818  Philippines
diyAudio Moderator
 
JojoD818's Avatar
 
Join Date: Mar 2003
Location: searching...
Diode types, what to choose.
Default Diode types, what to choose.

Hi,

I found this types of diodes on the net. What are their differences and which must I choose for rectification/power supply for signal conditioning circuits (preamps, tone cntrl, etc.).

1. Standard Recovery
2. Fast Recovery
3. Schottky
4. Ultrafast
5. Ultrasoft

Thanks,
Jojo
  Reply With Quote
Old 13th August 2003, 12:26 AM   #2
till is offline till
Banned
 
Join Date: Apr 2002
Location: Germany, Clausthal
http://www.diyaudio.com/forums/showt...996#post219996
here you see my choice: MBR10100 Schottkys

For Information look in this thread:
http://www.diyaudio.com/forums/showt...9164#post99164
  Reply With Quote
Old 13th August 2003, 03:08 AM   #3
jackinnj is offline jackinnj  United States
diyAudio Member
 
jackinnj's Avatar
 
Join Date: Apr 2002
Location: Llanddewi Brefi, NJ
Diode types, what to choose.
i haven't personally looked at the impulse response on a scope, but Linear Tech has an application note which pans the use of ultra high speed diodes for low noise supplies -- this due to ringing
  Reply With Quote
Old 13th August 2003, 03:55 AM   #4
sam9 is offline sam9  United States
diyAudio Member
 
sam9's Avatar
 
Join Date: Jun 2002
Location: Left Coast
It's been mentioned before, but the article on snubbing at www.hagtech.com is germain to this disdussion. Hegerman found that with proper snubbing, standard diodes work as well or better than the fancy stuff. A lot cheaper, too. And easier to find at your local supply.
  Reply With Quote
Old 13th August 2003, 07:03 AM   #5
JojoD818 is offline JojoD818  Philippines
diyAudio Moderator
 
JojoD818's Avatar
 
Join Date: Mar 2003
Location: searching...
Diode types, what to choose.
Default Snubbers

sam9,


If I use those fast diodes I still have to use snubbers right?

Jojo
  Reply With Quote

Reply


Diode types, what to choose.Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
diode bridge - 10000uF cap - diode tube - small cap - HV+ engels Tubes / Valves 5 29th January 2008 11:16 PM
hybrid power supply: diode bridge into diode tube engels Tubes / Valves 8 24th September 2007 10:18 AM
OS-CON types Glenn2 Digital Source 2 13th May 2007 01:07 PM
For you EE types, please help JMB Digital Source 5 1st July 2005 08:27 PM
For you EE types, help please? JMB Multi-Way 0 30th June 2005 11:13 PM


New To Site? Need Help?

All times are GMT. The time now is 09:31 PM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 16.67%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio
Wiki