|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Solid State Talk all about solid state amplification. |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
6th May 2011, 11:38 AM
|
#1 |
|
diyAudio Member
Join Date: Jul 2009
|
VMX700 MK2 JBSYSTEMS
Big problem with this amp one of the channels is not working always in protect the other channel is OK after comparing both channels there is a diference the good one as got a +70 Volts and the bad one as got at same points minus 70 Volts if I discionect the TR from outputs inclusive the drives Tr it does not go in protection. But now I'm in need of the service manual because I've measured all TR and Resistors and they seem oK.
Does anyone have this service manual for this amp please. JB |
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Improved PSU for Technics SL1210 MK2 and SP 10 MK2 (and others) | beetle | Analogue Source | 21 | 19th January 2010 11:25 PM |
| Cygnet Mk2 | gvr4ever | Multi-Way | 7 | 27th July 2007 03:58 PM |
| Buschhorn Mk2 or 3? | DaveCan | Full Range | 13 | 30th November 2005 09:39 PM |
| T/S parameters of JBSystems drivers | sstoiana | Multi-Way | 1 | 30th September 2003 08:11 PM |
| New To Site? | Need Help? |
| Page generated in 0.07328 seconds (69.85% PHP - 30.15% MySQL) with 10 queries |
