Very Simple 200W 4R amp

jalou1995 · 27th March 2011, 07:11 AM

I found this on the net, very simple but not really sure of its performance.
Opinions will highly be appreciated

Supply is split 50VDC

lineup · 27th March 2011, 09:31 AM

Lower part shoulld read TIP41-TIP42.

It looks good.
Maybe you should consider better audio output transistors.
Why not TIP35, TIP36

jalou1995 · 27th March 2011, 10:15 AM

@lineup, thanks for the correction, i really didnt noticed it

hehehe

jalou1995 · 27th March 2011, 10:44 AM

posted the wrong schematics (thanks lineup) here's the the correct one. If you look @ the component placement, the output trannies are 2SC5200 and 2SA1943

lineup · 27th March 2011, 11:41 AM

"trannies are 2SC5200 and 2SA1943"
They are great.
In the PCB tells correct.

What can be an issue is the bias by 1N4004 diodes.
Maybe 10 mA will not give wanted bias.
Diodes can not easily be put on heatsink. Only close to.

I suggest a transistor for setting bias. A vbe multiplier.
Such transistor that can be mounted on heatsink to sense heat.

jaycee · 27th March 2011, 05:28 PM

It's rubbish. Those biasing diodes are not on the heatsink so it wont be thermally stable. Also, driving 2SA1943/2SC5200 with TIP41C/TIP42C ? Why ?

ostripper · 27th March 2011, 06:05 PM

Quote:

Originally Posted by jalou1995

posted the wrong schematics (thanks lineup) here's the the correct one. If you look @ the component placement, the output trannies are 2SC5200 and 2SA1943

Just a couple more parts and you can have a "real amp" (below) , use mje340/350 for Q 10/11/12 and any Toshiba clone for output (4302/4281 or 1943/5200). These internet amps are pathetic ... Amp below has been thoroughly "abused".

OS

jalou1995 · 28th March 2011, 08:58 AM

Quote:

Originally Posted by jaycee

It's rubbish. Those biasing diodes are not on the heatsink so it wont be thermally stable. Also, driving 2SA1943/2SC5200 with TIP41C/TIP42C ? Why ?

"Rubbish" most of the circuits on the net are

27th March 2011, 09:31 AM	#2
lineup diyAudio Member Join Date: Dec 2005 Location: the north	Lower part shoulld read TIP41-TIP42. It looks good. Maybe you should consider better audio output transistors. Why not TIP35, TIP36 __________________ lineup

27th March 2011, 11:41 AM	#5
lineup diyAudio Member Join Date: Dec 2005 Location: the north	"trannies are 2SC5200 and 2SA1943" They are great. In the PCB tells correct. What can be an issue is the bias by 1N4004 diodes. Maybe 10 mA will not give wanted bias. Diodes can not easily be put on heatsink. Only close to. I suggest a transistor for setting bias. A vbe multiplier. Such transistor that can be mounted on heatsink to sense heat. __________________ lineup

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Simple 200W Amp	NinjaKitten	Chip Amps	39	11th December 2008 08:17 AM
50w @ 8r / 100w @ 4r / 200w @ 2r	costiss	Solid State	25	24th April 2003 10:23 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

27th March 2011, 10:15 AM	#3
jalou1995 diyAudio Member Join Date: Apr 2005 Location: davao city	@lineup, thanks for the correction, i really didnt noticed it hehehe

27th March 2011, 05:28 PM	#6
jaycee diyAudio Member Join Date: Apr 2004 Location: Norwich, UK	It's rubbish. Those biasing diodes are not on the heatsink so it wont be thermally stable. Also, driving 2SA1943/2SC5200 with TIP41C/TIP42C ? Why ?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)