Harmon Kardon HK6600 problem

pelayostyle · 21st March 2011, 03:31 PM

Hi Guys,
My HK6600 just started to have its right channel go out. It will turn on and play fine for about a minute then slowly fade out. If I put my ear up against the speaker i can faintly hear it. This is happening on all inputs too.

I have the service manual so I will begin the slow, grueling process of checking each component in the power amp section. I wanted to check with you guys first and find out where a good place to start looking would be. Any help would be greatly appreciated. Thanks.

pelayostyle · 22nd March 2011, 03:07 AM

I think I found the problem. I plugged my speakers into the "Speaker 2" posts and now its been working fine for the past couple hours. I'm going to clean out the selector switch and try the "Speaker 1" posts again.

21st March 2011, 03:31 PM	#1
pelayostyle diyAudio Member Join Date: Jan 2006 Location: los angeles	Harmon Kardon HK6600 problem Hi Guys, My HK6600 just started to have its right channel go out. It will turn on and play fine for about a minute then slowly fade out. If I put my ear up against the speaker i can faintly hear it. This is happening on all inputs too. I have the service manual so I will begin the slow, grueling process of checking each component in the power amp section. I wanted to check with you guys first and find out where a good place to start looking would be. Any help would be greatly appreciated. Thanks.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Harmon Kardon HK6100	demons_wing	Solid State	12	18th March 2012 09:07 PM
Harmon Kardon HD-970 problem	pkonstantinidis	Digital Source	20	19th January 2012 06:29 PM
Harmon Kardon	argonrepublic	Solid State	2	23rd June 2009 07:30 AM
Harmon Kardon HK770 amp problem	taj	Solid State	58	27th February 2007 02:36 PM
Harman Kardon HK6600	xinix	Solid State	6	16th October 2005 04:02 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

22nd March 2011, 03:07 AM	#2
pelayostyle diyAudio Member Join Date: Jan 2006 Location: los angeles	I think I found the problem. I plugged my speakers into the "Speaker 2" posts and now its been working fine for the past couple hours. I'm going to clean out the selector switch and try the "Speaker 1" posts again.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)